Joined
·
162 Posts
Nice article in this month's issue of Hemmings Motor News on the 1300 Alfa engine and its successors. Worth checking out.
Hemmings Article
1 - 1 of 1 Posts
1 - 1 of 1 Posts
Join the discussion
Recommended Reading
-
2.0L Oil
Engine ManagementI am in need of an oil change soon before I start my Alfetta for the first time in 40 years, and the Haynes manual says that the recommended oil is 10W/50, but I either can't find it, or it's stupid expensive. Will 10W/40 work instead? Thanks.- 10
- 429
-
AlfaTasteless · updated
-
Oil change in 71 Spider 1750
Engine ManagementHi Everyone, I'm seeking advice on changing the oil in my 1971 Spider 1750. I know this is a really basic thing, so let me provide a bit of backstory. The car was my dad's, he was the second owner from about 1973. I still remember riding in the back "seat" when I was kid. About 1983, it...- 9
- 413
-
ryanSpider · updated
-
Header configuration, AFR and Torque
Engine ManagementI have had Shankle headers on my Spider for over 20 years with no problems. My current motor makes 155 HP at the wheels at 6500 rpm and 135 ft-lbs at 5700 rpm 79 Spider on a dyno - The Sequel The Shankle collector was opened up for a 2 1/4" tail pipe and it has the glass pack type mufflers - a...- 0
- 167
-
alfaparticle · updated
-
Carburetor Conversion - Fuel & Ignition ECU Delete?
Engine ManagementHowdy peeps, my apologies if I've posted this thread in the wrong place. Mods, feel free to move it around if needed. I've converted my EFI 1985 105/115 2.0 Spider to carbs - Runs great! But the car is still operating with both the Bosch ignition and fuel ECUs hooked up. I would like to remove...- 19
- 890
-
DIY wire core HT leads and caps
Engine Management1600 GTV with crossover intake, pretty much standard, but for headers and electronic pickup in dizzy. It seems the local auto parts stores and even our beloved UK/US suppliers seem universally to sell 180 degree (ie straight) plug caps, mostly with long risers which makes the HT leads foul the...- 1
- 277
-
Ranz · updated
Join now to ask and comment!