Alfa Romeo Forums banner

1 - 6 of 6 Posts

·
Registered
Joined
·
1,898 Posts
Discussion Starter #1
A buddy has this 3.5 liter V6 which sadly has a melted piston.
He really wants to use this thing but has so far not found a replacement piston and I thought maybe you guys could help identify the thing...

It's a 101mm piston and it looks like this:


Any ideas?
 

·
Registered
Joined
·
11,618 Posts
JE pistons ... in Australia. Will make any piston.

Pete
 

·
Registered
Joined
·
1,898 Posts
Discussion Starter #3
Probably, but not ONE piston, only sets. MUCH cheaper if it turns out to be a Porche piston or similar.
 

·
Registered
Joined
·
203 Posts
Matts,Get 6x Kieth black Chevy v6 pistons in 4 inch bore.Cheap and you can bore your existing sleeves .6 bigger and have a "new" sleeve for your new pistons.Will solve all your problems

Barry
 

·
Admin
Joined
·
4,862 Posts
Barryh said:
Matts,Get 6x Kieth black Chevy v6 pistons in 4 inch bore.Cheap and you can bore your existing sleeves .6 bigger and have a "new" sleeve for your new pistons.Will solve all your problems
Very smart thinking Barry!

Welcome aboard the site.
 
1 - 6 of 6 Posts
Top