Alfa Romeo Forums banner
1 - 2 of 2 Posts

·
Moderator
1990 164QV Euro spec & 1991 168B
Joined
·
28,453 Posts
As for dizzy cap check spring loaded carbon button in center of cap. It should be spring loaded and it should protrude about 1/4" or more so it will push into center of rotor button.

As for fuel flow you need about 8 oz in 15 seconds and you also need 35 to 40 psi of pressure and if fuel hose is split inside tank you won't get enough pressure.
 

·
Moderator
1990 164QV Euro spec & 1991 168B
Joined
·
28,453 Posts
Part number: 00605720490000
Part description Z GASKET Pump rubber mounting bushing
Part number: 00823936010000
Part description Z FUEL FILTER basket
Part number: 00607773470000
Part description HOSE PER METER in tank hose Use Gates submersible SAE30R10 5/16" if possible.

Many of our Alfa parts vendors should have these parts.

As for the two external molded elbows in fuel vent system they are pretty hard to come by and rest of black tubing above tank in trunk is not rubber.

here are some links that might help:

http://www.alfabb.com/bb/forums/164...64-12v-steel-fuel-tank-internal-plumbing.html

http://www.alfabb.com/bb/forums/164...4-12v-usa-model-fuel-pump-steel-gas-tank.html
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top