Alfa Romeo Forums banner
1 - 1 of 1 Posts

· Moderator
28,710 Posts
You have to remove circlip from end of axle before you try to remove CV joint. You need a pair of expanding snap ring pliers with pins to fit holes in circlips. Clean off end of axle to see it.

And if you find your replacement inner boot to small for GTV6 or Milano axle you can use a 164 inner boot. They will work on both inner and outer on those RWD axles.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.