Gas Tank Plug?
Join the discussion
Recommended Reading
-
SPICA start time - is it supposed to be much slower than Webers?
Carburetors, Fuel Injection & Air IntakeI have a 1978 spider with the SPICA system. The PO got the pump rebuilt by Wes Ingram and replaced the TA. In my 3 years of ownership, the car almost always takes a lot of cranking to start. I want to call it 10 seconds, but before I accidentally exaggerate I will measure a few times over the...- 32
- 2K
-
DCOE tuner near NYC?
Carburetors, Fuel Injection & Air IntakeHi, looking for a DCOE expert near NYC. It's actually for a 240Z but I have Italian DCOE's. Any help would be greatly appreciated! Thanks, Mo- 5
- 301
-
SPICA Throttle Body rebuild
Carburetors, Fuel Injection & Air IntakeHello all - Forum member John Jeffries kindly gave me a spare set of SPICA 2000 throttle bodies that I want to rebuild. My fully rebuilt, Ingram pump'd 2000 motor runs wonderfully but I suspect it having an air leak at idle as I have a persistent vacuum thru the bodies and have done all, yes...- 27
- 2K
-
r-mm · updated
-
fuel filter, copper washer, leak
Carburetors, Fuel Injection & Air IntakeI know this has been covered before. I've been trying for a week to fix a leak from the copper washer of the center bolt on the front fuel filter. I tried all the ideas from other posts like, sanding the old washer with 600 grit, I even heated it up and cooled it down to soften the copper, I've...- 13
- 6K
-
Bill2298 · updated
-
Roadtrip is gone
Carburetors, Fuel Injection & Air IntakeAs you could read here: https://www.alfabb.com/threads/roadtrip-john-stewart-posts.689929/ a valuable source of this forum is gone . The second irreplaceable loss to the forum in only one year. And if you need to find posts from John you should use number 144 instead of the quoted 441...- 13
- 952
-
Rosenmöller · updated
Join now to ask and comment!