Alfa Romeo Forums banner
1 - 3 of 3 Posts

· Registered
Joined
·
2,155 Posts
I recently used a Fuel Tank Repair Kit from POR-15. The kit includes cleaner to remove sludge and varnish, then a metal prep solution to etch the metal and lastly a sealer.

The cleaning was done in two stages. The first stage washed out a lot of varnish. The second stage was rather clean, so the first stage must have been very effective. The metal prep left the inside of the tank looking like new metal. Finally, the sealer coated the tank with a silver "paint-like" material that is supposed to seal pinholes and prevent any future rust.

I'm happy with the results so far. Here's a link:

http://www.por15.com/product.asp?productid=316
 

· Registered
Joined
·
2,155 Posts
I second that... Or third that.. Whatever. Yes, it would be good for all the parts to start off clean. The extra effort is not that great.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top