FS: LSD + 5.125 Crown & Pinion

1 - 1 of 1 Posts

jg1053

Registered

Joined Nov 5, 2005

509 Posts

Discussion Starter • #1 • Mar 30, 2015

Had these in my parts bin as a spare for the Race Car. However have decided to sell as I need to start to build a new motor. Both in good condition. They are currently on flea bay @
Alfa Romeo Limited Slip Diff Centre Plus 5 125 Ratio | eBay
Jim

1 - 1 of 1 Posts

Recommended Reading

Wanted Heater box for GTV

Alfa Romeo Parts For Sale & Wanted

Hey all, I removed and sold the factory AC unit and am going back to a non-A/C car. I'm looking for a heater box for my GTV, if anyone has one for sale. I'll need the complete box, ducts, fan, heater core etc, in decent (or at least rebuild-able) condition. I'm not sure if Spider boxes work...
- 1
- 19
- BH Classics · updated a moment ago
Wanted Floor pans wanted 86 GTV6

Alfa Romeo Parts For Sale & Wanted

Any idea where to get floor pans for an 86 GTV6?
- 0
- 16
- B
  Ballvice · updated 1 h ago
For Sale Alfa GTV6 LHD Right (passenger side) electric mirror NOS

Alfa Romeo Parts For Sale & Wanted

I have a NOS right (ie passenger) side electric rear vision mirror for a LHD car that is no use for my RHD car. It is complete minus the back cover and in excellent condition. I have a spare second hand rear cover that I can include if anyone wants that. The back cover is rust free but has a...
- 5
- 708
- R
  rowan_jackson · updated 1 h ago
Wanted Signal light screws for duetto

Alfa Romeo Parts For Sale & Wanted

Hello all I am in need of 2 screws that contain the lens in the housing for the front signal lights on a duetto. I also need 2 rear taillamp lens screws. If you've got or know where to source pls let me know. Ciao al!
- 1
- 37
- howndog · updated 2 h ago
For Sale Weber DCOE 40 Type 72 carb, cleaned and rebuilt

Alfa Romeo Parts For Sale & Wanted

Hey all! I have a SINGLE Weber DCOE 40 Type 72 carb. MADE IN ITALY. I disassembled it, soaked it in Pine Sol and soaked all the jets in carb cleaner, then re-assembled with new gaskets, screws and top cover. I'm no carb expert, but everything seems to be complete and in working order, plates...
- 3
- 651
- BH Classics · updated 2 h ago