Alfa Romeo Forums banner
1 - 6 of 70 Posts

· Registered
2,092 Posts
I believe I read someplace the aluminum Brembo calipers from a Milano could be swapped to the Alfetta if the spacer inserted for vented disc was removed.

Along with that I believe I read the vented disc could be drilled for 4x98 and use the V6 calipers.

any first hand experience out there?
1 - 6 of 70 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.