donuts
1 - 3 of 3 Posts
1 - 3 of 3 Posts
Join the discussion
Recommended Reading
-
Super charger kit
Milano/75 (1985-1993)Does anyone have a supercharger kit for sale for a 3l milano. I always wanted to buy one of Greg's kits from hiperformance store but now that I can actually afford it, he no longer makes the kit or has anything available to piece one together. My milano has a 3l 164s conversion and is running...- 58
- 5K
-
ABS pump continuous running
Milano/75 (1985-1993)The ABS pump on my platinum failed last fall, pumped brake fluid out of the motor/pump seal rather than into the interior. I managed to find a parts car with working ABS pump (as in I hooked up a battery, turned the key to "on" and pumped the brakes, causing the pump to run momentarily then...- 1
- 8
-
Mordwho · updated
-
Spacers above the transaxle crossmember
Milano/75 (1985-1993)Hi All, Reposting this here as the part is shared between the GTV6 and the Milano/75. I'm slowly putting my GTV6 back together and I've come to realize I'm missing the spacers that go between the transaxle/DiDion crossmember and the body. Is anyone able to measure theirs so that I could make...- 0
- 12
-
Crackership · updated
-
Clearance between driveshaft and tailshaft
Milano/75 (1985-1993)Does anyone know the clearance between the driveshaft and the tailshaft? With a collapsed bushing I need to stuff some rubber in the bushing hole to raise the tailshaft. Interim of course, until I can replace the bushing. Alternatively, would someone know how much distance inside the bushing...- 0
- 30
-
iachella · updated
-
Throttle Position Sensor
Milano/75 (1985-1993)Hi. Trying to determine the correct Bosch part # for a 2.5L. My '84 GTV-6 has 0 280 120 302 installed, while my Milano Gold has 0 280 120 304? Thanks.- 0
- 28
Join now to ask and comment!