Alfa Romeo Forums banner

1 - 1 of 1 Posts

·
Registered
Joined
·
292 Posts
Discussion Starter #1
Cleaning out the following spares.
Prices as marked or Best Offer plus Shipping.
I have measured and have a matrix of all journal dimensions.

I also have about 18 new sets of mostly ACL and King rod and main bearings from standard to -.o10, -o20, -o30 that I can sell with the cranks at $60 a set of BOTH Rods and mains.
Shipping from 14543 - Boxed at 25" x 9" x 6" - 1300 cranks at 35 pounds - 1750 at 40 pounds - UPS Ground. Costs have ranged from about $.60 to $1.40 / pound in the US.

More detailed pic available. Any questions please call or email direct to:

Chris D
585 330 5456
[email protected]

4 Cylinder Crankshafts
#Rods MainsComments$
1300
1 -.o30 - .o20# 2 & 4 mains Grooved for improved oil flow, Oil galleys drilled tapped and plugged . Micro PolishedReady to install$600
2 -.o10 -.o10Micro Polished Ready to install$600
1600
5 -.o10 -.o1oOil galleys drilled tapped and plugged Needs Rods and Mains Cut$400
4 -.o10 -.o1oNeeds Rods and Mains Cut$300
6 -.o20 -.o1oOil galleys drilled tapped and plugged Needs Rods and Mains Cut$350
7Needs #3 Rod Journal Welded$100
1750
8Standard UncutStandard UncutMains are within spec. Rods are a couple Tenths under.Great Race Crank - I'd polish and use it or go first undercut. Oil galleys drilled tapped and plugged $600

1624522
IMG_3013.JPG
1624523
1624524
1624525
1624526
1624527
1624528
 
1 - 1 of 1 Posts
Top