[aamatruda]

Before I install my freshly rebuilt head I want to confirm I have the correct studs for a 105 1600 engine. The 750 and 101 manuals I have show a different arrangement than the one in the attached photo. Any input is greatly appreciated.

Andy Amatruda

 

[Gordon Raymond]

The studs are correct, but you do not usually need the long ones in the upper corners for most manifolds. They are 8 x 1.25 x8 x 1 x 37 The center stud is incorrect. on 1600 Veloce heads this is a bolt, 8x1.25x85 mm and there is a matching helicoil in the head for that bolt. Here are the pictures.