Joined
·
45 Posts
Anyone know what Corbeau bracket is correct for a 1977 Alfetta GT?
Thanks!
Rob
Thanks!
Rob
Corbeau Seat Bracket
1 - 1 of 1 Posts
1 - 1 of 1 Posts
Join the discussion
Recommended Reading
-
Alfetta GT A/C condensor removal
Alfetta & GTV6 (1972-1986)I've got a '79 Alfetta GT, USA version, a.k.a. Sprint Veloce. I removed most of the factory air conditioning system right after buying the car several years ago, but am just now getting around to removing the A/C condensor. The car tends to overheat in stop-and-go traffic during the hotter...- 1
- 29
-
Wanted, parcel shelf for 78 Alfetta GTV with AC
Alfetta & GTV6 (1972-1986)Looking for a good/usable parcel shelf. Fits under dash on right side of LHD car. Not sure if AC and non-AC cars are the same. MAY be the same as GTV6.- 1
- 72
-
DPeterson3 · updated
-
1982 Alfetta gtv coupe hatch lock
Alfetta & GTV6 (1972-1986)Well I've got the ****s on, I've just had the rear hatch repainted and removed the rear hatch barrel lock to have it painted properly I've worked out how the barrel and lock go together but how do you get that stupid rubber seal back on ,its to tight to get through the opening on the hatch and...- 7
- 148
-
Alfetta rear calipers inboard adjustment screw leaking
Alfetta & GTV6 (1972-1986)I have a set of freshly rebuilt rear calipers (sent out for rebuild) that I have got in place and hooked up on my 75 alfetta. Once brake fluid was in the system and mostly bled the inboard adjustment screws (the two adjusters with the 7mm head without any locknut closest to the differential)...- 7
- 161
-
Stonewheels69 · updated
-
Horn will not quit!
Alfetta & GTV6 (1972-1986)Seeking advice on a horn that blows constantly. Background: I replaced the steering wheel on my 86 GTV6 with an aftermarket similar to a Nardi. Prior to the steering wheel removal the horn was inoperative. With the new wheel, I made a shim for the copper ring to make it extend far enough to...- 8
- 424
Join now to ask and comment!