Alfa Romeo Forums banner

1 - 11 of 11 Posts

·
Registered
1987 Milano, 1986 Spider Veloce, 1977 Alfetta GTV Euro
Joined
·
90 Posts
Discussion Starter #1
A complete Ansa exhaust that I removed from my car for a new set. Now looking at the pieces painted, I regret spending the money on a new set. Far from perfect, it's in great shape and has a lot of life left for someone who wants to upgrade to great sound and a noticeable increase in performance. The resonators and mufflers are in great shape. The rear stinger section has some rust in one of the exhaust tips. Not noticeable once mounted and can easily be repaired. The collector pipe isn't the prettiest but it works. I can bubble wrap the pieces and place in a large box. Greyhound shipping terminal to terminal anywhere in the U.S. is quite affordable. Or shipping of your choice. $295 + shipping
1619822
1619823


1619825
1619826

  1. 1619827
    1619828
    1619829
 

·
Registered
1987 Milano, 1986 Spider Veloce, 1977 Alfetta GTV Euro
Joined
·
90 Posts
Discussion Starter #3
Hi there. It came off of a 1976 Alfetta GT. Not sure if the sedan has same layout. Thanks for asking.
 

·
Premium Member
Joined
·
303 Posts
It looks like there are a lot of non-original welds and dents in the system and header. Is that accurate?
 

·
Registered
1987 Milano, 1986 Spider Veloce, 1977 Alfetta GTV Euro
Joined
·
90 Posts
Discussion Starter #5
That is correct. A couple of non-original cuts and the collector pipe has several welds.
 

·
Registered
1987 Milano, 1986 Spider Veloce, 1977 Alfetta GTV Euro
Joined
·
90 Posts
Discussion Starter #7
I will bubble wrap and box these up. I'll provide dimensions and weight for folks to figure out shipping cost.
 

·
Registered
1987 Milano, 1986 Spider Veloce, 1977 Alfetta GTV Euro
Joined
·
90 Posts
Discussion Starter #8
Two packages $22 + $65 for a total of $87. That's via FedEx with my account discount to New Canaan, CT. The two large ones get taped together and shipped as one.
1620569
 

·
Registered
1987 Milano, 1986 Spider Veloce, 1977 Alfetta GTV Euro
Joined
·
90 Posts
Discussion Starter #9
For those of you who want to check shipping cost on your end, the first box containing the collector pipe, small resonator, large resonator and tail/muffler weighs 44.4 lbs and the dimensions are 58x20x10
The second box containing the Shankle headers weighs 9.6 lbs and is 11.5x13x22. I haven't heard back from Stonewheels69 so this complete Ansa set is still available.
Thanks,
Mark
Columbus, OH 43202
 

·
Registered
Joined
·
1,201 Posts
For shipping really large items, I'd recommend using a regular freight company.
My experience has been that UPS and FEDEX will get expensive for oversize items,
unless you have a corporate account or some way to get discounted rates.
I bought a low mileage rear axle assembly, on a pallet, recently and Averitt shipped it from OK to FL for $150.
 

·
Registered
1987 Milano, 1986 Spider Veloce, 1977 Alfetta GTV Euro
Joined
·
90 Posts
Discussion Starter #11
Thanks for the info. Yes, FedEx charges $100 extra for oversized. That's why I had to separate the items into two parcels. Making it a lot less expensive. I'll be happy to strap this on to a pallet if somebody wants to go that route.
 
1 - 11 of 11 Posts
Top