Alfa Romeo Forums banner

Clutch replacement 1986 Spider Quad?

10K views 17 replies 12 participants last post by  spiderserie4 
You can use a floor jack with a trans adapter to drop the trans once it's unbolted, but that understates the complexity of the project, especially if you don't have the car sitting high off the ground. Back when we were young, strong, and dumb, we used to just hoist the transes out onto or chest, then slowly roll it over onto the ground. Over 50 now, I'm not doing that any longer.
It's not an especially hard job, but you need a lot of tools, good shop space, equipment, and some understanding of what you're doing. It's not the first job I'd tackle as an Alfa novice.
Andrew
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top