Alfa Romeo Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
460 Posts
I would like to point out that someone in this BB used a 90 degree plastic fitting from Home Despot screwed into the fill hole with a long hose on the other end for the oil to get in. the threads of the coupling did not exactly match those in the trans case, but the plastic coupling's are soft and will distort to fit.

I think this is a good idea. I suggest you search this forum. There might have been pictures I don't remember.

I did mine in a scientifically correct, but very painfull, way. I put a hose through the top of the oil jug, then injected air with an electric bicycle pump into the container. Sounds great in theory but really does not work because of the oil viscosity. It took along time for the air to push the oil.
 
1 - 1 of 1 Posts
Top