[otteud96]

Almost, if not impossible to put that in with the engine in the car... if I recall good luck

 

[otteud96]

Almost, if not impossible to put that in with the engine in the car... if I recall good luck

If it is the pedal assembly....

 

[kengta]

Almost, if not impossible to put that in with the engine in the car... if I recall good luck

Not what others say.

 

[axlejor]

I managed on my Berlina with the engine in.

 

[GregSef]

If you are discarding the spica setup, I am looking for the 2 rods and rod ends from the throttle bellcrank to the throttle bodies and Spica pump. I seem to have misplaced mine.

Greg

 

[Pat74gtv2000]

Almost, if not impossible to put that in with the engine in the car... if I recall good luck

The engine is out, but I believe you are correct. The last time I did it, it was during the motor swap as well. I'm sure there was a reason for that. Cheers!

 

[Pat74gtv2000]

If you are discarding the spica setup, I am looking for the 2 rods and rod ends from the throttle bellcrank to the throttle bodies and Spica pump. I seem to have misplaced mine.

Greg

I may have sent those to the person who has the pump. I'll check. If I still have them I'll send them your way

 

[Alfar7]

There are well made Weber linkage designs that use a cable to operate. without changine to the old under carb system. Do a search on Amazon for Weber carb linkage.

 

[Pat74gtv2000]

Hi Richard, how have you been. I really enjoy the camshafts you provided. I should have specified, I need the main assembly that mounts to the firewall and the accelerator pedal bolts to.

 

[Veep]

Hi Richard, how have you been. I really enjoy the camshafts you provided. I should have specified, I need the main assembly that mounts to the firewall and the accelerator pedal bolts to.

you can use the spica setup nicely with a cable operation. I would prefer that above the eu linkage with rods. I put that in my racecar with EFi on the ITBs.
Parts readily available in europe. used but even new (at a price.. OKP GmbH). Or you weld an extension on the set you have .

 

[kengta]

You can also modify your FI arm. see:

(240) Throttle pedal linkage Modification Spica to Carb | Alfa Romeo Forums (alfabb.com)