cam gear shims!
Join the discussion
Recommended Reading
-
Camshafts & Timing Chain
Engine Repair, Diagnostics & RebuildingDear all I felt that my car, an Alfa Romeo 115 GTV 2000 from 1974, with 70.000 miles, was a little bit ¨lazy¨ so with a friend, we are doing a set up & maintenance of it. We will exchange the injection pump for a new one reconstructed by Wes Ingram, new Injectors & TA, taking the chance to...- 13
- 150
-
Gonzalo Molla · updated
-
Exhaust Hangers
Engine Repair, Diagnostics & RebuildingMy GTV has a stainless exhaust built by a guy using the Magnaflow front section and magnaflow mufflers. I acquired a front section and commissioned him to mimic the rest of the system. I recently noticed as I was poking around under the car that the hanger on the rear muffler is a very hard...- 3
- 42
-
iachella · updated
-
Alfa 105 1600 Engine Head Identification
Engine Repair, Diagnostics & RebuildingHi, I'm a new member. I have already introduced myself in the specific thread. My car is a GT 1300 Junior, but since i bought it already had a 1600 engine installed. I am trying to understand what type of engine it is. Unfortunately the engine has a blank engine code, both close to the gearbox...- 2
- 88
-
Mechanical Tach Drive Specifics
Engine Repair, Diagnostics & RebuildingWe are running a 105 block in our race car. The race car uses a mechanical tach (a Smiths Chronometric). So we need to know how many revolutions the Alfa 105 tach drive does so that we can hook straight up, or get a conversion box. Also need to know which way the cable rotates - clockwise or...- 15
- 150
-
Another 2L Nord Engine Rebuild--your input wanted
Engine Repair, Diagnostics & RebuildingI'm about to embark on rebuilding a 2L (from a '74 spider SPICA) to put in a 105 Guilia Sedan that currently has a 1300 and has a hydraulic clutch. I've read some books (eg Jim K's), been to supplier web sites, studied the forums...there seems to be a variety of different and evolving ideas and...- 47
- 8K
-
ejpoulsen · updated
Join now to ask and comment!