Alfa Romeo Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
60 Posts
Discussion Starter #1
Hello,
I'm close to being ready to start my 1971 GTV. Saw water on the floor, pulled out the heater assembly. Core is rusted out and flooded/ruined the blower motor too. So, I ordered the parts ,but meanwhile it seem like I should be able to run the water hose from the pump to the banjo fitting on the rear of the manifold, by-passing the heater assembly.
Am I correct?

Thanks, Rob.
 

·
Registered
Joined
·
189 Posts
Did this successful on my 2000gtb 2 ywars ago when the heater valve was sipping warm water over my feet ;). Hose was long enough
 

·
Registered
Joined
·
189 Posts
This by-pass arrangement was how my car was when I got it. I had to replace the heater core, fan motor and control valve and source the coolant hoses.
1622731
 
1 - 4 of 4 Posts
Top