Joined
·
400 Posts
Hi, looking for a replacement windshield for my friend's 84 GTV6. Bronze tint with built in antenna new would be best. Perfect used one would be next best.
Thanks for any help.
J
Thanks for any help.
J
Bronze windshield with antenna needed
1 - 3 of 3 Posts
Joined
·
4,333 Posts
Is this for Mark's car? I have one, gorgeous, with antenna. Not new but it is OEM St Gobain glass. From very low mileage 86.
Joined
·
40 Posts
2016 GTV-6 Windshield
Anyone have a bronze with antenna windshield for a 1986 GTV-6? Thanks!
Anyone have a bronze with antenna windshield for a 1986 GTV-6? Thanks!
1 - 3 of 3 Posts
Join the discussion
Recommended Reading
-
Unequal side to side brake pad wear - Rear
Alfetta & GTV6 (1972-1986)Buon giorno, tutti, I found unequal brake pad wear at the rear brakes, with more wear on the driver's side pads than the passenger side pads. On each individual side, each set of pads are equally worn. The side with more wear shows evidence of more heat: I see more peeling caliper paint, and...- 36
- 924
-
76Satisfaction · updated
-
Super Stiff Clutch Pedal
Alfetta & GTV6 (1972-1986)When I bought my 86 GTV6 (Car of Many Colors) I noticed that the clutch pedal effort was way more than that of my Alfetta GT. It is even higher than the effort of my 164S, which is higher than my Alfetta. But the effort on the GTV6 is significantly more than the 164. It is unacceptably high...- 1
- 32
-
tomhenneka · updated
-
Alfa Romeo GTV 6 running rough
Alfetta & GTV6 (1972-1986)I have a 1983 Alfa Romeo GTV6 sometimes the car does not want to start up when it's cold and needs extra throttle to start. Sometimes however it will start up on its own, it's kind of hit and miss. But my biggest problem is it'll run fine for the most part when cold, except it will backfire...- 3
- 43
-
Scice · updated
-
Alfa Romeo Gtv6 Futurista
Alfetta & GTV6 (1972-1986)I’m sure many of you have seen the Lancia Delta Futurista from Automobili Amos. I am going to do a similar take on my gtv6 and I will be developing some parts along the way such as carbon bumpers side skirts little pieces ect. The plan is to paint it in Rosso, and for the interior it will mainly...- 25
- 1K
-
Plugging cam cover rivet holes
Alfetta & GTV6 (1972-1986)Since I've got my 'Fetta GT running, my only indication of oil pressure is oil spewing out of the rivet holes for the preheat hose brackets on the cam cover. Has anyone plugged these holes before? I was thinking aluminum MIG welding or something similar so I wouldn't have to deal with ugly rivet...- 2
- 111
-
AlfaTasteless · updated
Join now to ask and comment!