Alfa Romeo Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1,760 Posts
OK you have air in the rear section becasue you didn't bench bleed the master. Because the lines are so long, Every time you pump it, you move the air, then you bleed and stop, The air moves back towards the master as air will do.

You need to do a full on vacuum bleed (you can make your own with a coffee can and use your shop vac) not a little tinny mity vac or pressure bleed to chase that air out. If you can find a big syringe, you can also reverse bleed it and force the air back up to the master. The local hardware store might have something you can use.

Good luck!!!
 
1 - 1 of 1 Posts
Top