Joined
·
2,177 Posts
Blipshift shirt you'll want to see - only 3 days!
1 - 3 of 3 Posts
Joined
·
209 Posts
and I just finished pestering my wife for their "Transfagarasan" shirt...
1 - 3 of 3 Posts
Join the discussion
Recommended Reading
-
Review: 27mm front sway bar install on Alfetta
Alfetta & GTV6 (1972-1986)Hi there, I had been looking for a 24mm bar for my Alfetta sedan, but a couple fell through and the others available didn't have end link bushings. This made them a no go for me as I don't have a vise or press right now and can't access one during the pandemic. So, I bought a 27mm bar from...- 39
- 1K
-
86 GTV6 v/s Milano 3.0
Alfetta & GTV6 (1972-1986)Hi Guys, It’s been 4 months of complete and pure joy owning my Milano 3.0. This is my first Alfa and it’s incredible for what it is! How does it compare to the GTV6?! The Milano is capable of an automatic slight drift in wet weather. What happens in the GTV6? Is the clutch very heavy? By looking...- 0
- 14
-
Roy Malik · updated
-
A mystery, a suspect, and the victim - will it ever be solved? or is there a serial killer
Alfetta & GTV6 (1972-1986)The victim - me and my 1985 GTV6. The case (simplified): Feb 2019 I take it to the shop and diagnosed low compression to worn right bank camshaft and oil leak from belt tensioner. Told the shop to take engine out for easier work. Heads came off and headed to specialist shop in rebuilding...- 12
- 324
-
V6 cam cover bolt torque
Alfetta & GTV6 (1972-1986)Does anyone know the torque spec for the 7mm cam cover bolts on a V6? I'm trying to seal up all the leaks on my 84 GTV6 and I noticed that my new cam covers appear to be weeping already. I didn't want to over tighten the bolts and strip any more threads. The rear driver side under the brake...- 7
- 86
-
archeologist · updated
-
Aluminum Coolant Reservoir (Group Buy?)
Alfetta & GTV6 (1972-1986)Is there any interest in an aluminum coolant reservoir for the GTV6? I see reproduction plastic coolant reservoirs from the usual suppliers. My original is showing splits at the seam. (for now I've 'welded' it with hot melt glue...) Does anyone have any experience with these reproductions...- 98
- 6K
-
ghnl · updated
Join now to ask and comment!