Alfa Romeo Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
4,753 Posts
I've posted this information several times elsewhere but, for thread posterity...

This centering device / alignment bearing / propshaft part is available and is sold by Centerline (part number FD810) but it's not listed on their site. You have to call. I don't recall the last price I paid but the one I got was NOS. I doubt any more NOS but the price was reasonable. My opinion is that 2 of these bearings should be included in the propshaft rebuild kit as it is quite commonly worn or damaged.

There are 2 versions of this spherical bearing but they are interchangeable. The difference was in the width of the bearing; the ID and OD were the same. Most of the original Alfa ones I've seen that are the wide type. The narrow type that you have pictured should work fine. Take your time assembling these pieces as it's easy to knock the split outer race apart.
 
1 - 1 of 1 Posts
Top