Alfa Romeo Forums banner
1 - 2 of 2 Posts

· Administrator
Joined
·
13,137 Posts
I made a tool from aluminum that pushes on the center venturi support bars. It can be used with a plastic mallet one side at a time to get the choke moving. Then they slide right out.
If terribly corroded in place more drastic measures are required.
The 2 pronged fork like tool fits closely, and does not mar the support bars.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top