Alfa Romeo Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
2,984 Posts
Discussion Starter #1
I seem to have lost my spica dran plug m16 x 1.5
Looking at the local places I could not find one :(

someone nearby would be best. San Jose, Menlo Park etc. or close by.
or know where I could pick one up.
if not I will be making one..

-Thanks
 

·
Premium Member
Joined
·
3,569 Posts
slyalfa,

You're talking about the large plug at the bottom of the logic section, correct?. If you don't find one locally, lemme know... I have one you can have.

I seem to have lost my spica dran plug m16 x 1.5
Looking at the local places I could not find one :(

someone nearby would be best. San Jose, Menlo Park etc. or close by.
or know where I could pick one up.
if not I will be making one..

-Thanks
 

·
Registered
Joined
·
2,984 Posts
Discussion Starter #3
yea the big one on the bottom. it looks like it would be very hard to get at installed so I did not put the car together over the weekend.
 

·
Registered
Joined
·
9,977 Posts
Technically, it's not really a drain plug. It opens the Cold Start Solenoid plunger cavity so that the hydraulic piston can be removed.
 

·
Registered
Joined
·
2,984 Posts
Discussion Starter #5
I stoped by the hardware store and got a pipe plug so I will just mill it down and thread it to m16x1.5

I removed all the extra parts from my spica ;)
I got a box of all the extra parts balls levers springs etc.
all the junk in the logic side not needed any more....

so now it is just a dran .... :)
 
1 - 5 of 5 Posts
Top