Alfa Romeo Forums banner

Alfetta GT ATE clutch MC

1695 Views 1 Reply 2 Participants Last post by  papajam
Does anyone have a clear/sharp parts drawing of the ATE clutch MC assembly for the Alfetta GT? If so, do you have some means of sending it?

I have the Alfetta parts book but all it shows is the Bonaldi assembly. They're definitely not the same.

I don't know about others, but my relatively new no name clutch MC leaks fluid like a sieve around the bottom of the reservoir. Obviously the paint below is completely curdled.

Since I don't throw anything away I have an ATE unit with a screw on reservoir, but unfortunately the innards are disassembled. See the problem?

Fairly soon I'll be switching out engines and want to repaint the engine bay before installing the fresh engine. I'll not do this until I have a working clutch MC which doesn't and won't leak.

If you can help, of course either download it here or email me directly to:

[email protected]

1 - 2 of 2 Posts
Parts drawing sent.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.