Alfa Romeo Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
220 Posts
Hi all
I probably can't add too much to whats been said apart from my car is fitted with the Harvey Bailey kit, as I have never driven it yet
( still under restoration ) I can't comment on the ride/handling of the car other than the P/O who fitted the kit said that it greatly improved the handling.
On the subject of anti roll bars the front is 29mm thick, but the rear is thinner at only 13mm! I think the original is around 16mm. The springs are shorter if anybody wants to know the height and thickness I will measure them, and the shock absorbers are Bilsteins.
The ride height is I think about right similar to Don's, again I will try to post a picture, Have tried once and failed!
Regards Geoff.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top