I believe that you can get a generic wiper blade refill and cut it to size. The Wiper Blades I have are 18" so they do a slightly better job of clearing the Windscreen.
Yes, Steve is correct, they were a TRICO design made under license by Carello. Far as I know, they have not been available for some time... until now.
Sorry for being a spoil-sport but even though it might not feel right for such an Italian diva factory original Montreals have a complete Bosch wiping mechanism and the cars only ever came with stainless 16‘‘ (40 cm) Bosch Type 1178 wiper blades in the conventional design albeit with the rare 9mm straight stick-on fitting.
Bruce Taylor once more already said it all on his website and page 119 of The Essential Companion. Patrick Dasse’s press pictures of the production car on page 214 ff. also show the Bosch wipers, and if you are still not convinced just check the original Montreal manual und parts catalogue. And I swear I had already bought wire type wipers myself before I checked.
Luckily I found some originals now on Italian Ebay, search word: spazzole tergicristallo Alfa Montreal. From time to time some still seem to come up.
In the process of removing the engine from my Montreal, I have also tried to clean up the Engine Bay in general, and there was something that was mentioned some time ago about a re-enforcing plate to stiffen the Steering Box mounting to the body. I removed the bolts that hold my Steering Box to...
This is a new thread to cover the front bumper x banana rubbers that are no longer available. Here is a PDF file of the first CAD drawing. It´s a single part that can be used on both sides (destra / sinistra). A mp4 Solid Works animation and a Solid Works STL file are available to those who want...
i have some more Montreal parts for sale.
let me know if you are interested.
also have engines, gearboxes and much more...
rear lights are in very very nice condition (I think)
more parts to follow
Does anyone here have a car with the "Shield" type Bertone Badge for the Front Fender? I believe they were on early cars, the later cars have the "Skeleton" type. I need an Overall Height and Width please. Thanks!
I recently get the gaskets from OKP and they informed instructions or recommendations are not available from the manufacturer. They said the gaskets must be installed professionaly by someone who knows the procedures. I did not find anyone at Elring who could provide guidance. Any help will be...