[sfloridalfa]

I just purchased an '86 GTV-6 that will be parted out over the next 3 weeks. The car is in Ft. Lauderdale Fl., and is conplete. I purchased the car to replace 12 to 18 items on my '81.

These are some of the items for sale:

Hood (No rust, perfect, black paint).
Sunroof (Good all the way round, very minor surface rust on top).
Front grill (with or without headlights).
New version A/c compressor and brackets (The later style was much better. I have already upgraded mine.
Relays, coil, guages, etc. (Not the speedo, BUT I will now part with the speedo the I made to work with a later style transaxle. As you know the pick ups for the later style speedos were different so I created one using the original outer case and ribbon, and Milano guage. It is accurate, but needs illumination).
Windows (All glass is available. Like a good Alfa owner, I keep a spare front and rear window in my bedroom closet!!).
Center consule w/ radio housing.
A/C box and blower.
Inside door handles
Fuse box w/all relays and fuses.
Window washer bottle
Wiper arms w/ perfect covers over the nuts.
Black leather back seat - perfect condition
black door panels - Just about perfect.
Arm rests - Perfect condition.
Door handles w/ key. fully functional. I need a passenger side "pull" handle, and if I can't find one, I will have to remove that piece from this offer. BUT driver side is perfect.
Brake parts - (2) rear cals. , (2) fronts and rotors.
Oil pan??
Air/fuel meter
etc.

IF you don't see it listed... ask... I have tons of spare parts to clear.

I can be contacted thru Alfabb.com , or my cell954)817-4971

Alvin.

 

[GeeTeeVeeSix]

Air Dam

l'm looking for an air dam to fit my '83 GTV6. I'm not sure if '86, and '83 are the same, but am guessing they are. Anyone else able to speak to this please jump in...

Thanks,

Bill

 

[sfloridalfa]

GTV6 parts for sell

l'm looking for an air dam to fit my '83 GTV6. I'm not sure if '86, and '83 are the same, but am guessing they are. Anyone else able to speak to this please jump in...

Thanks,

Bill

Hi Bill,

The spoiler is the same but I too need a spoiler for my GTV6. I purchased the car for:
Rear hatch
Front spoiler
Steering col. - I need an ign switch, and light switch.
Both rear axles
Interior lights
Hood release
Double A/C - I will sell a perfect single A/C Blower box
Locking gas cap

This is not going to be a weekend project, but I'm really looking forward to the new / used parts.

Thanx for the interest.

Alvin

 

[don hodgdon]

Private Message sent

 

[das]

need a battery cover asap....

 

[GeeTeeVeeSix]

Gtv6

Alvin,

Sounds like your needs match mine. Thanks for getting back to me. I too am looking for a locking gas cap, and a decent gearshift bushing.

Good luck with your project...

 

[Ennio]

Hello do you have the right hand side mirror? I am seraching for one since my car is a gtv2.0 and only has the left side mirror.

 

[sfloridalfa]

Hello do you have the right hand side mirror? I am seraching for one since my car is a gtv2.0 and only has the left side mirror.

Yes I do have both mirrors, and neither have the normal cracks at the base. I need to put power to them and check they function properly. If it works properly, $50 FOB Ft. Lauderdale. You would need to give me an address in the USA to ship it to. I think Richard from Stephen's Alfa had said you were looking for some part.
Regards,

Alvin
(954) 817-4971

 

[sfloridalfa]

need a battery cover asap....

I got it. $30 free shipping.

Alvin
(954) 817-4971

 

[Ennio]

That sounds good!! Here are some questions I have:
1)Can you post some pics of the item?
2)Is it a Vitaloni III e3 31330? Here are some pics of mine http://www.alfabb.com/bb/forums/showthread.php?t=43808&highlight=Ennio&page=8
3)Is it working?
4) As my car has only the left hand side mirror, it has only one switch to operate the item. In the gtv6 with two mirrors, how are they operated? With one switch? two?

Thanks, I will see who can bring it here.

 

[AlfaGTV25]

GTV 6 Parts

I am looking for the plastic trim piece that goes around the sunroof handle. Do you have that?

John

 

[tomgtv6]

Outside door handles? Front spindels? Front yoke of driveshaft? Starter?


Tom

 

[Ricardino]

Seats and Belts

Hi,

I'm looking or seats to fit into my 67 GTV. Do you know if yours fit? and can you post pictures of the seats?

Thanks
RP

 

[GeeTeeVeeSix]

WTB back seat

Thinking about buying your back seat for my '83 GTV6. I suspect yours would fit? Have a price for it? Ships to California.

Thanks, Bill

 

[sfloridalfa]

I'm looking or seats to fit into my 67 GTV

Hi,

I'm looking or seats to fit into my 67 GTV. Do you know if yours fit? and can you post pictures of the seats?

Thanks
RP

My seats are shot, but if I were you, I would go original. I don't think GTV-6 seats would fit.

Sorry,
Alvin

 

[sfloridalfa]

plastic trim piece around sunroof handle

John[/QUOTE]

Hi John

It was already destroyed. I do have a NEW suroof handle, and the sunroof panel is pretty clean. Very minor surface rust.

Sorry I could not help you.
Alvin

 

[sfloridalfa]

Door Handles, Trunk Lock And Key

Outside door handles? Front spindels? Front yoke of driveshaft? Starter?


Tom

Hi Tom,

Door handles are good with matching locks and key. For some reason that I have not figured out, the key does not work the trunk. It may just need cleaning. All (3) locks and Key $200 + $15 shipping.

Alvin

 

[sfloridalfa]

Starter.....

Outside door handles? Front spindels? Front yoke of driveshaft? Starter?


Tom

Starter is good. I tried to start this car when I purchased it and the starter was strong. I've never removed one but will get back to you with a price. I do not know if I will be able to remove the drive shaft. I can't do the front spindles as the car must be able to roll to get rid of the leftovers!!

Alvin (954)817-4971

 

[sfloridalfa]

Back Seat, Black Leather......

Thinking about buying your back seat for my '83 GTV6. I suspect yours would fit? Have a price for it? Ships to California.

Thanks, Bill

Hi Bill,

The back seat has some dried out leather,(tops ofthe seat back), but really isn't that bad. I am trying to bring it back and will email you pics after next weekend. By then I will know if the leather will soften up.

Alvin

 

[Ennio]

So you have an e-mail so I can contact you easier?