Joined
·
39 Posts
Alfa 155 wheels on a Spider?
1 - 4 of 4 Posts
Joined
·
8,084 Posts
same in europe 4 x 108 PCD on S4 spiders, so very much doubt they'd fit, as there is over 7mm difference between the bolt centres of a 4 x 108 and a 4 x 98
Joined
·
39 Posts
Ok, thanks so much!
1 - 4 of 4 Posts
Join the discussion
Recommended Reading
-
Where do the 10mm sockets go?
Spider - 105 & 115 Series (1966-1994)I dont know, that is a mystery of the ages. Today I opened the hood to finalize the routing of the AFR sender, kinda around the brake booster, etc. and opened the cap to the clutch master cylinder just to look. I set the cap to the side just for a second to get a flashlight and rag and when I...- 6
- 50
-
SkiBum · updated
-
71 s2 spider: starter solenoid question
Spider - 105 & 115 Series (1966-1994)Hello again, Silly question, no chuckling... So, I’m accustomed to vintage Mustang work. This is a new adventure for me. In those old American cars, the solenoid sits up nice and pretty on the passenger side fender. My question is... where the h*ll is the starter solenoid on these babies? I...- 7
- 89
-
radojko · updated
-
What did you do Alfa Spider related today?
Spider - 105 & 115 Series (1966-1994)I noticed that the 164 & 168 guys have a very active thread about what they've been up to, and I think us Spider guys and gals need to get with the program- so I'm gonna start and see what happens! Today was a very good day! It was a beautiful warm, clear day in South Florida, and I'm sorry to...- 2K
- 156K
-
rcmanners · updated
-
What colour should used oil be?
Spider - 105 & 115 Series (1966-1994)I use Rotella T4 and change it often. The oil I remove from the engine is pretty close to black. Is that normal?- 7
- 108
-
Canadian Spider · updated
-
L-Jet voltage threshold
Spider - 105 & 115 Series (1966-1994)What is the voltage threshold that the L-Jet system needs to function properly? I ask this because I've suddenly developed a cold start issue on my S3, and good cold starts have been one of the hallmarks of this car. It will crank, sputter and die, then takes cranking about 10 seconds, with...- 11
- 150
-
fledermaus · updated
Join now to ask and comment!