I will try to present here some informations on the 1993-1996 Alfa V6 TI racecars. I am not an expert, however very interested in this racecar and have over time collected some photos and infos, magazines and even factory info.
The car participated in the german racing series named DTM( Deutsche Tourenwagen Meisterschaft), Class1 up to 2,5L, competing with German brand like Mercedes and Opel(from 94). The previous year 1992 BMW also competed, but as factory BMW pulled out because they wanted to shift the engine rearwards but were not allowed from the organization. As this was a touring car series in 1993 the cars had to be based on production engines with their basic build from the production car. BMW and Mercedes had made 2,5 L evo versions of their road cars to fit in this class. Tuning was unlimited, but there was a 11.500 rpm limit. The BMW and Mercedes raced as 4 cylinders, but Alfa and Opel, raced V6 engines. Regulation here was that they must have the original V angle of the production engine and also block material. So Opel had an disadvantage at the beginning as they had to race with anarrower 54 degr. V-angle and and a heavy iron Block. Although their engine was just as powerful as the Alfa.
The subject has been debated elswhere on the Internet also and fortunately I have some links which could add some info:
DTM - ITC
After a thrilling 1992 racing season when the 155 GTA cars dominated the Italian SuperTurismo championship, Alfa Corse decided to step up its game in 1993 by developing various track versions of the 155. Its most ambitious goal was the DTM (Deutsche Tourenwagen Meisterschaft), the German touring championship, an extremely competitive event with a huge public following (an average of 62,800 spectators in 1993).
THE CAR
Taking advantage of the adaptation possibilities granted by the generous D1 category regulation, the standard production 155 was drastically revised. The compact 60° V6 dry sump light alloy engine with a capacity of 2498 cc (93 x 61.3) and cylinder head with four valves per cylinder (intake in titanium), was able to develop 420 HP at 11,800 rpm and a maximum torque of 30 kgm at 9,000 rpm with a weight of just 110 kg. On the 155, it was arranged longitudinally overhanging the front axle, supported by a sub-frame.
The six-speed gearbox was connected to the power unit by a magnesium casting, which also incorporated the oil reservoir (8 litre) and the front differential. The transmission was four-wheel-drive with epicyclic transfer box, viscous coupling and self-locking sliding front and rear differentials. Drive torque distribution was 33% to the front and 67% to the rear.
The vehicle body measured 4,576 mm in length, 1,750 mm in width and 1,410 mm in height with a weight of 1,040 Kg and weight balancing of 50% over both axles. The body was made out of carbon fibre and the frame was strengthened by a cage-type roll-bar. As on the 155 GTA, the suspension configuration was a McPherson on all four wheels, with elliptical cross-section tubular lower wishbones and trailing arms on the rear end for adjusting toe-in with stabiliser bars adjustable by the driver.
From the second race, the 19’’ wheels were abandoned in favour of 18’’ wheels that were better suited to the numerous town routes. The injection system was also improved during the racing season, being fitted with two injectors per can, and a new sequential gearbox was adopted.
THE VICTORIOUS DEBUT. 1993
The Alfa Corse team, managed by Giorgio Pianta, therefore fielded two 155 V6 TI cars, driven by Nicola Larini and Alessandro Nannini. Another pair of twin cars were also driven, for the Schubel team, by Giorgio Francia and Christian Danner.
The car's victorious debut at the Zolder track was simply the first step towards Nicola Larini winning the title, beating the current champion Klaus Ludwig, driving for the imposing Mercedes mega-team. Larini notched the highest number of victories in the DTM's history, no fewer than 10 in 20 races, joined by another two wins obtained by Nannini and a non-league race win in Donnington.
1994 SEASON
Enthusiasm for the win in 1993 and excellent sales feedback in Germany for the 155 cars prompted Alfa Corse to continue developing the car for the following season. The car was improved in every part: the power unit was lightened, lowered and equipped with air-controlled valve return, which bought benefits, particularly in terms of power delivery. The car body was lowered by no less than 60 mm and its aerodynamics were significantly altered.
The biggest changes were, however, linked to an increase in the use of electronics: a special ABS, developed by the American Kelsey-Hayes (an optical speed scanner prevented the simultaneous blocking of all four wheels in a four wheel-drive configuration: racing conditions can mislead a normal ABS not built for the stresses of the track, where decelerations of more than 2 g are possible) and an electronically-controlled active suspension system developed in conjunction with TAG Electronics. On the safety front, the normal equipment was joined by a new airbag on the drivers steering wheel.
Five new 155 cars were lined up at the beginning of the championship: two official Alfa Corse cars driven by Larini and Nannini. Another three managed by Schubel Engineering for France, Danner and the Danish new-entry Chris Nissen. The six 1993 cars were leased to private individuals. Nannini dominated the first part of the championship, winning seven out of the first 10 races, but the veteran Ludwig, with his improved Mercedes, got his own back and was awarded the driver's title, even though Larini was not short of successes. At the end of the season, he was also joined by Stefano Modena, making Alfa the make that scored most victories.
The 1995 SEASON (DTM and ITC)
The popularity of D1 class cars (Class 1 for the FIA) had risen considerably and the number of non-league events outside the normal DTM circuit was growing. In 1995, there were no fewer than five, grouped by the FIA into the new ITC (International Touring Car series) championship. At the same time, the regulations had also become less strict, meaning that the already-extreme touring cars now retainined only the silhouette of the original model: the chassis' and suspensions were redesigned.
At the championship, Alfa Romeo lined up six official cars and three for private individuals. Larini and Nannini with the Alfa Corse-Martini Racing team, Stefano Modena and Michael Bartels for Euroteam, Michele Alboreto and Christian Danner with Schubel. The first part of the championship was beset by delays in developing the new car (the “Step 2”) but at last it was ready. The season brought slim pickings and concluded in Magny-Cours with the ITC title going to the Mercedes driven by Bernd Schneider, already the DTM champion.
1996 SEASON (ITC)
1996 saw the DTM disappear to be replaced by the ITC, which had now become a world championship with 13 double events under its belt: opening in Hockenheim and closing in Suzuka. Alfa Corse fielded no fewer than eight official 155 cars: Larini e Nannini (Alfa Corse-Martini Racing), Giancarlo Fisichella and Christian Danner (Alfa Corse-TvSpiefilm), Stefano Modena, Michael Bartels, Gabriele Tarquini and Jason Watt (Alfa Corse-Jas).
The 1996 car was a further development of the ill-fated Step 2: the track was widened by 30 mm because the standard production car had also been widened. The tank arrangement and aerodynamic configuration were also altered. The transmission was improved with the adoption of a sophisticated X-Trac transmission, while the power unit was further improved to the threshold of 460 HP. The electronics was upgraded to a new Magneti Marelli system.
During the championship, Nannini was still driving for Alfa Romeo and the Nurburgring debut of the new Lancia-based 90° 6V engine (2498 cc, 98X55,2 mm, 490 HP at 12,000 rpm) put him back in the running for the title. At least until the penultimate event in San Paolo, where wins by Nannini and Larini were not enough to snatch the title from the Opel Calibra driven by Manuel Reuter.
Already in Magny-Cours Alfa Romeo had stated its intention of abandoning the championship. This decision was soon followed by Opel, thus writing the last chapter in the short yet exciting era of the ITC. Escalating costs (following liberalisation of the electronics and suspension, Mercedes soared to a new level of technology in 1996 with the wholesale adoption of composite materials for the chassis) and failure to achieve proportional feedback in the media and market put a premature end to the championship.The 1996 cars therefore represented the maximum flowering of technology applied to racing cars, which were allowed to develop virtually untrammeled in an era when even Formula 1 had adopted extremely strict regulations, particularly on electronics.
SOURCES
Centro Documentazione Alfa Romeo – Arese MI
Autosprint, annate 1970 al 1973 e 1976-2008
Il Quadrifoglio, annate 1966-1973 e 1983-2003
L’Alfa e le sue auto, Chirico, Milan, 2007
Quattroruote, annate 1956-2009
Alfa 155D2 che motore aveva?!? - Pagina 2
A modelcar site that listed up all the races these cars participated in:
Alfa Romeo in the Deutsche Tourenwagen Meisterschaft
Avery nice Italian V6 TI site:
Alfa Romeo 155 ITC 1996 Alessandro Nannini - Track|FEVERTrack|FEVER
Alfa V6 TI on Face book, Seems everybody wants them to race again!
https://www.facebook.com/155V6Ti
Ultimate carpage on Alfa 155 V6 TI, correct as far as I know!
1993 - 1996 Alfa Romeo 155 V6 TI DTM - Images, Specifications and Information
Wikiwand on the 155 car and the V6 TI:
Alfa Romeo 155 - Wikiwand
Quality book on the V6 TI from Auto Italia Magazine editor Peter Collins, who is an authority on many race cars. Here based on friendship with Alfa Corse engineer Sergio Limone , who was chassis reponsible. Here you read parts of the book for free, but recommend to buy it for interested parties because it contains very interesting stories from Development of the racecars!
https://books.google.no/books?id=bp...ge&q=Homologated engines from DTM 1993&f=true
This is what I could write down in a hurry, intending to make some scans from period magazines and printed matter.
I have identified 3 different race engines used in this car, so intentions here is to find out exactly their specifications.
1. st series was only used in 1993 was "based" on the 2,5L Busso V60 engine, in the 155 road car, but only with regards to V60-angle, block material(alu) and 2,5L. According to press material from Alfa Corse. Power was 420 Hp.
2. nd. series was introduced 1994 and was a completely New V60 construction. While the cam drive on the first engine was in front, on this engine the cam drive was on the rear and also the valves had pneumatic closing. Power of this engine was about 450 Hp. and it was used also parallell with the later 90 degrees engine which arrived in 1996, in order to have a comparison of which engine functioned best! For me it remains to collect precise data on this engine because mostly only the first and last engines are written about!
As an aside on this engine is a good friend of mine, an Alfa dealer here with good contacts in Italy was invited to Motori Moderni, with Carlo Chiti as owner and manager. He was showed around in the factory by mr. Chiti and surprise there they built this second generation engine and some were stored on the floor! Why my friend knew what those engine were, well he recognized them from engine posters he got from other contacts. So I got a poster of that engine in my garage as a memory from the times!
3.rd. generation engine was based on the RPV(Renault, Peugeot, Volvo 90 degr. V6 engine from Lancia Thema. It arrived in 1996 much delayed by FIAT management resistence against this engine basis. So they tried to confuse by saying it was based on a chopped Montreal engine. However homologation paper copied in the mentioned V6 TI book says its based on the Lancia engine and also if it had been based on the Montreal engine the bore on the race engine was so big that they could not fit within the cylinder distances of the Montreal engine.
Here the data of this latest engine which made Alfa more competitive again from around the middle of 1996. Impression is that had the management not delayed the use of this engine Alfa could have won the 1996 championship. However these things rely on so many things, so that is only a thought many had.
More versions of these egines could have existed, so its interesting if more info can be dug out and added here!
Here the data for this engine from an article in Auto Italia:
G.
The car participated in the german racing series named DTM( Deutsche Tourenwagen Meisterschaft), Class1 up to 2,5L, competing with German brand like Mercedes and Opel(from 94). The previous year 1992 BMW also competed, but as factory BMW pulled out because they wanted to shift the engine rearwards but were not allowed from the organization. As this was a touring car series in 1993 the cars had to be based on production engines with their basic build from the production car. BMW and Mercedes had made 2,5 L evo versions of their road cars to fit in this class. Tuning was unlimited, but there was a 11.500 rpm limit. The BMW and Mercedes raced as 4 cylinders, but Alfa and Opel, raced V6 engines. Regulation here was that they must have the original V angle of the production engine and also block material. So Opel had an disadvantage at the beginning as they had to race with anarrower 54 degr. V-angle and and a heavy iron Block. Although their engine was just as powerful as the Alfa.
The subject has been debated elswhere on the Internet also and fortunately I have some links which could add some info:
DTM - ITC
After a thrilling 1992 racing season when the 155 GTA cars dominated the Italian SuperTurismo championship, Alfa Corse decided to step up its game in 1993 by developing various track versions of the 155. Its most ambitious goal was the DTM (Deutsche Tourenwagen Meisterschaft), the German touring championship, an extremely competitive event with a huge public following (an average of 62,800 spectators in 1993).
THE CAR
Taking advantage of the adaptation possibilities granted by the generous D1 category regulation, the standard production 155 was drastically revised. The compact 60° V6 dry sump light alloy engine with a capacity of 2498 cc (93 x 61.3) and cylinder head with four valves per cylinder (intake in titanium), was able to develop 420 HP at 11,800 rpm and a maximum torque of 30 kgm at 9,000 rpm with a weight of just 110 kg. On the 155, it was arranged longitudinally overhanging the front axle, supported by a sub-frame.
The six-speed gearbox was connected to the power unit by a magnesium casting, which also incorporated the oil reservoir (8 litre) and the front differential. The transmission was four-wheel-drive with epicyclic transfer box, viscous coupling and self-locking sliding front and rear differentials. Drive torque distribution was 33% to the front and 67% to the rear.
The vehicle body measured 4,576 mm in length, 1,750 mm in width and 1,410 mm in height with a weight of 1,040 Kg and weight balancing of 50% over both axles. The body was made out of carbon fibre and the frame was strengthened by a cage-type roll-bar. As on the 155 GTA, the suspension configuration was a McPherson on all four wheels, with elliptical cross-section tubular lower wishbones and trailing arms on the rear end for adjusting toe-in with stabiliser bars adjustable by the driver.
From the second race, the 19’’ wheels were abandoned in favour of 18’’ wheels that were better suited to the numerous town routes. The injection system was also improved during the racing season, being fitted with two injectors per can, and a new sequential gearbox was adopted.
THE VICTORIOUS DEBUT. 1993
The Alfa Corse team, managed by Giorgio Pianta, therefore fielded two 155 V6 TI cars, driven by Nicola Larini and Alessandro Nannini. Another pair of twin cars were also driven, for the Schubel team, by Giorgio Francia and Christian Danner.
The car's victorious debut at the Zolder track was simply the first step towards Nicola Larini winning the title, beating the current champion Klaus Ludwig, driving for the imposing Mercedes mega-team. Larini notched the highest number of victories in the DTM's history, no fewer than 10 in 20 races, joined by another two wins obtained by Nannini and a non-league race win in Donnington.
1994 SEASON
Enthusiasm for the win in 1993 and excellent sales feedback in Germany for the 155 cars prompted Alfa Corse to continue developing the car for the following season. The car was improved in every part: the power unit was lightened, lowered and equipped with air-controlled valve return, which bought benefits, particularly in terms of power delivery. The car body was lowered by no less than 60 mm and its aerodynamics were significantly altered.
The biggest changes were, however, linked to an increase in the use of electronics: a special ABS, developed by the American Kelsey-Hayes (an optical speed scanner prevented the simultaneous blocking of all four wheels in a four wheel-drive configuration: racing conditions can mislead a normal ABS not built for the stresses of the track, where decelerations of more than 2 g are possible) and an electronically-controlled active suspension system developed in conjunction with TAG Electronics. On the safety front, the normal equipment was joined by a new airbag on the drivers steering wheel.
Five new 155 cars were lined up at the beginning of the championship: two official Alfa Corse cars driven by Larini and Nannini. Another three managed by Schubel Engineering for France, Danner and the Danish new-entry Chris Nissen. The six 1993 cars were leased to private individuals. Nannini dominated the first part of the championship, winning seven out of the first 10 races, but the veteran Ludwig, with his improved Mercedes, got his own back and was awarded the driver's title, even though Larini was not short of successes. At the end of the season, he was also joined by Stefano Modena, making Alfa the make that scored most victories.
The 1995 SEASON (DTM and ITC)
The popularity of D1 class cars (Class 1 for the FIA) had risen considerably and the number of non-league events outside the normal DTM circuit was growing. In 1995, there were no fewer than five, grouped by the FIA into the new ITC (International Touring Car series) championship. At the same time, the regulations had also become less strict, meaning that the already-extreme touring cars now retainined only the silhouette of the original model: the chassis' and suspensions were redesigned.
At the championship, Alfa Romeo lined up six official cars and three for private individuals. Larini and Nannini with the Alfa Corse-Martini Racing team, Stefano Modena and Michael Bartels for Euroteam, Michele Alboreto and Christian Danner with Schubel. The first part of the championship was beset by delays in developing the new car (the “Step 2”) but at last it was ready. The season brought slim pickings and concluded in Magny-Cours with the ITC title going to the Mercedes driven by Bernd Schneider, already the DTM champion.
1996 SEASON (ITC)
1996 saw the DTM disappear to be replaced by the ITC, which had now become a world championship with 13 double events under its belt: opening in Hockenheim and closing in Suzuka. Alfa Corse fielded no fewer than eight official 155 cars: Larini e Nannini (Alfa Corse-Martini Racing), Giancarlo Fisichella and Christian Danner (Alfa Corse-TvSpiefilm), Stefano Modena, Michael Bartels, Gabriele Tarquini and Jason Watt (Alfa Corse-Jas).
The 1996 car was a further development of the ill-fated Step 2: the track was widened by 30 mm because the standard production car had also been widened. The tank arrangement and aerodynamic configuration were also altered. The transmission was improved with the adoption of a sophisticated X-Trac transmission, while the power unit was further improved to the threshold of 460 HP. The electronics was upgraded to a new Magneti Marelli system.
During the championship, Nannini was still driving for Alfa Romeo and the Nurburgring debut of the new Lancia-based 90° 6V engine (2498 cc, 98X55,2 mm, 490 HP at 12,000 rpm) put him back in the running for the title. At least until the penultimate event in San Paolo, where wins by Nannini and Larini were not enough to snatch the title from the Opel Calibra driven by Manuel Reuter.
Already in Magny-Cours Alfa Romeo had stated its intention of abandoning the championship. This decision was soon followed by Opel, thus writing the last chapter in the short yet exciting era of the ITC. Escalating costs (following liberalisation of the electronics and suspension, Mercedes soared to a new level of technology in 1996 with the wholesale adoption of composite materials for the chassis) and failure to achieve proportional feedback in the media and market put a premature end to the championship.The 1996 cars therefore represented the maximum flowering of technology applied to racing cars, which were allowed to develop virtually untrammeled in an era when even Formula 1 had adopted extremely strict regulations, particularly on electronics.
SOURCES
Centro Documentazione Alfa Romeo – Arese MI
Autosprint, annate 1970 al 1973 e 1976-2008
Il Quadrifoglio, annate 1966-1973 e 1983-2003
L’Alfa e le sue auto, Chirico, Milan, 2007
Quattroruote, annate 1956-2009
Alfa 155D2 che motore aveva?!? - Pagina 2
A modelcar site that listed up all the races these cars participated in:
Alfa Romeo in the Deutsche Tourenwagen Meisterschaft
Avery nice Italian V6 TI site:
Alfa Romeo 155 ITC 1996 Alessandro Nannini - Track|FEVERTrack|FEVER
Alfa V6 TI on Face book, Seems everybody wants them to race again!
https://www.facebook.com/155V6Ti
Ultimate carpage on Alfa 155 V6 TI, correct as far as I know!
1993 - 1996 Alfa Romeo 155 V6 TI DTM - Images, Specifications and Information
Wikiwand on the 155 car and the V6 TI:
Alfa Romeo 155 - Wikiwand
Quality book on the V6 TI from Auto Italia Magazine editor Peter Collins, who is an authority on many race cars. Here based on friendship with Alfa Corse engineer Sergio Limone , who was chassis reponsible. Here you read parts of the book for free, but recommend to buy it for interested parties because it contains very interesting stories from Development of the racecars!
https://books.google.no/books?id=bp...ge&q=Homologated engines from DTM 1993&f=true
This is what I could write down in a hurry, intending to make some scans from period magazines and printed matter.
I have identified 3 different race engines used in this car, so intentions here is to find out exactly their specifications.
1. st series was only used in 1993 was "based" on the 2,5L Busso V60 engine, in the 155 road car, but only with regards to V60-angle, block material(alu) and 2,5L. According to press material from Alfa Corse. Power was 420 Hp.
2. nd. series was introduced 1994 and was a completely New V60 construction. While the cam drive on the first engine was in front, on this engine the cam drive was on the rear and also the valves had pneumatic closing. Power of this engine was about 450 Hp. and it was used also parallell with the later 90 degrees engine which arrived in 1996, in order to have a comparison of which engine functioned best! For me it remains to collect precise data on this engine because mostly only the first and last engines are written about!
As an aside on this engine is a good friend of mine, an Alfa dealer here with good contacts in Italy was invited to Motori Moderni, with Carlo Chiti as owner and manager. He was showed around in the factory by mr. Chiti and surprise there they built this second generation engine and some were stored on the floor! Why my friend knew what those engine were, well he recognized them from engine posters he got from other contacts. So I got a poster of that engine in my garage as a memory from the times!
3.rd. generation engine was based on the RPV(Renault, Peugeot, Volvo 90 degr. V6 engine from Lancia Thema. It arrived in 1996 much delayed by FIAT management resistence against this engine basis. So they tried to confuse by saying it was based on a chopped Montreal engine. However homologation paper copied in the mentioned V6 TI book says its based on the Lancia engine and also if it had been based on the Montreal engine the bore on the race engine was so big that they could not fit within the cylinder distances of the Montreal engine.
Here the data of this latest engine which made Alfa more competitive again from around the middle of 1996. Impression is that had the management not delayed the use of this engine Alfa could have won the 1996 championship. However these things rely on so many things, so that is only a thought many had.
More versions of these egines could have existed, so its interesting if more info can be dug out and added here!
Here the data for this engine from an article in Auto Italia:
G.