Adjustable cam pulleys for 12v | Alfa Romeo Forums

1 - 1 of 1 Posts

Alfanatiker

·

Registered

Joined May 26, 2006

·

240 Posts

Discussion Starter • #1 • Mar 20, 2015

Where could this be found? Glennwood, Beninca, Gozolli?

I´m primarily looking for some with degrees marked on the pulleys.

If they look nice and are god made, I will pay for them...

My engine looks like ending on about 9,15:1 DCR with my cams, and i need to retard them at least 2-3 degrees I would guess.

1 - 1 of 1 Posts

Recommended Reading

Another 2L Nord Engine Rebuild--your input wanted

Engine Repair, Diagnostics & Rebuilding

I'm about to embark on rebuilding a 2L (from a '74 spider SPICA) to put in a 105 Guilia Sedan that currently has a 1300 and has a hydraulic clutch. I've read some books (eg Jim K's), been to supplier web sites, studied the forums...there seems to be a variety of different and evolving ideas and...
- 47
- 8K
- ejpoulsen · updated 3 h ago
Mechanical Tach Drive Specifics

Engine Repair, Diagnostics & Rebuilding

We are running a 105 block in our race car. The race car uses a mechanical tach (a Smiths Chronometric). So we need to know how many revolutions the Alfa 105 tach drive does so that we can hook straight up, or get a conversion box. Also need to know which way the cable rotates - clockwise or...
- 0
- 50
- J
  Jay Laifman · updated 7 h ago
Camshafts & Timing Chain

Engine Repair, Diagnostics & Rebuilding

Dear all I felt that my car, an Alfa Romeo 115 GTV 2000 from 1974, with 70.000 miles, was a little bit ¨lazy¨ so with a friend, we are doing a set up & maintenance of it. We will exchange the injection pump for a new one reconstructed by Wes Ingram, new Injectors & TA, taking the chance to...
- 11
- 139
- Gonzalo Molla · updated 15 h ago
Alfa 105 1600 Engine Head Identification

Engine Repair, Diagnostics & Rebuilding

Hi, I'm a new member. I have already introduced myself in the specific thread. My car is a GT 1300 Junior, but since i bought it already had a 1600 engine installed. I am trying to understand what type of engine it is. Unfortunately the engine has a blank engine code, both close to the gearbox...
- 0
- 34
- D
  Dam · updated 23 h ago
Camshaft shim advice

Engine Repair, Diagnostics & Rebuilding

Hello Alfisti, I am in the process of having my SPICA pump rebuilt and I am changing out my intake cam to a 10.5 lift. I've spoken with Wes Ingram who'll be building the pump for this purpose. My question is how would I go about ordering the correct shims? I've removed a cam before, so I'm...
- 1
- 101
- howndog · updated 2 d ago