i need the linkage system that is located under the carbs for a euro manifold [email protected]
accelarator linkage for euro manifold WANTED
1 - 2 of 2 Posts
1 - 2 of 2 Posts
Join the discussion
Recommended Reading
-
Roadtrip is gone
Carburetors, Fuel Injection & Air IntakeAs you could read here: https://www.alfabb.com/threads/roadtrip-john-stewart-posts.689929/ a valuable source of this forum is gone . The second irreplaceable loss to the forum in only one year. And if you need to find posts from John you should use number 144 instead of the quoted 441...- 7
- 649
-
Rosenmöller · updated
-
What is the part # for dummy thermostatic activator for 71 spica
Carburetors, Fuel Injection & Air IntakeWondering what the correct dummy TA would be for my 71 GTV with Spica.Looking for the part # for the proper tool.- 0
- 66
-
SPICA start time - is it supposed to be much slower than Webers?
Carburetors, Fuel Injection & Air IntakeI have a 1978 spider with the SPICA system. The PO got the pump rebuilt by Wes Ingram and replaced the TA. In my 3 years of ownership, the car almost always takes a lot of cranking to start. I want to call it 10 seconds, but before I accidentally exaggerate I will measure a few times over the...- 30
- 2K
-
$500 thermostatic actuator, why?
Carburetors, Fuel Injection & Air IntakeIf anyone has seen my thread on my project, they already know I'm crazy. So lets take this to the next level of crazy. Owners of Spica injected cars already understand the problem with the thermostatic actuators and the costs. My question is why? This is why. This spring below the...- 29
- 3K
-
Opiwan88 · updated
-
Dellorto Carbs
Carburetors, Fuel Injection & Air IntakeLater "early" European delivery Alfas, after the US got Spica in 1969, got Dellorto carbs, in addition to Solex and Weber according to parts manuals. They are pretty common on Euro post-1970 cars even into the mid-80's. Earlier, US experience is mostly, if not solely, with Webers so there is a...- 27
- 3K
-
Anfanuts · updated
Join now to ask and comment!