[tulsalfa]

If you have a spare AAV for a Spider with the L-Jetronic system, I could use one for a project that I am attempting.

If you have a good, working one, please email me at mandlebaum at
s
b
c
g
l
o
b
a
l
dot net and let me know how much you want for it.

Thanks in advance,
Dean

 

[kelly1mm]

I have one from an 84 parts car. I don't know if it is good or not. Is there a way to test it? If so, let me know and I will check it out. If not, and you want to take your chances, PM me an offer.

LDK

Some pictures just to make sure we are talking about the same part.

 

[ghnl]

Test it this way. Put it in the freezer for 15-20 mins. Then look through and the opening should be nearly fully open. Next put it in an oven at 150F for 15-20 mins. Now the internal vane should be blocking the opening.

 

[kelly1mm]

Test it this way. Put it in the freezer for 15-20 mins. Then look through and the opening should be nearly fully open. Next put it in an oven at 150F for 15-20 mins. Now the internal vane should be blocking the opening.

Thanks for the instructions on the test for these. Best part, it works!