Alfa Romeo Forums banner

1 - 6 of 6 Posts

·
Registered
Joined
·
837 Posts
Discussion Starter #1
Sorry for the lousy photo but while putting everything back together after changing engine mounts, and intake runner hoses, I saw this round doohickie on the passenger's side that is attached to the harness that goes back to the two relays for the A/C fans. What is it? I also noticed that it has a broken wire on it too.
 

Attachments

·
Registered
Joined
·
554 Posts
That is probably the two spade connector plug for the temperature sensor to activate the cool down relay. It is usually a probe mounted into the fan shroud on the passenger side near the top right.
 

·
Registered
Joined
·
837 Posts
Discussion Starter #4
Thanks! So it clips to the fan shroud or is it captured by the top right hand fan shroud bolt?
 

·
1966-2013
Joined
·
13,741 Posts
It affixes to the shroud proper, more toward the edge that surrounds the fan blades, nowhere near the shroud to rad mounting bolts.

A spook about with the search engine here and in the AC subsection down at the bottom of the forum may reveal better pictures than what I linked to of the sensor correctly installed.
 

·
Registered
Joined
·
837 Posts
Discussion Starter #6
Thanks, it must have popped off when I loosened the fan shroud.
 
1 - 6 of 6 Posts
Top