Alfa Romeo Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
22 Posts
Discussion Starter #1
guys, are the front fenders on 91/92 164S, B, L, LS, and whatever other models exist the same? or is the S version lower or different in some way? i need to source an S front bar and trying to figure out how rare they are considering there was only 2-300 S's imported to Australia, vs a few thousand of the other models..
 

·
Premium Member
Joined
·
26,814 Posts
Fenders on 91-93 B/L/S models the same but fenders on 94/95 LS/Q different size opening over parking lamp/turn signal unit on USA models to match Euro facelift Bosch light assemblies so 94-95 USA models use a slightly lower parking/turn signal light assembly.

91-93 S bumper and 94-95Q bumpers pretty much the same, but 94-95LS model bumpers completely different from other models.

91-93 164B/L model bumpers themselves same as S/Q but have lower spoiler/valence.
 

·
Premium Member
Joined
·
9,742 Posts
I'm confused? 91-93 B/L/S are all the same or B/L are the same and S is lower?
1991-1995 Bumpers on the front (excludes LS model) are the same except the S and Q model have the lower spoiler. Same with the rear bumper.
So B/L/S/Q all have same bumpers but the catch is the S/Q bumpers although the same do not just bolt up easy to the spoilers. There is some drilling, spacers and minor cutting of some plastic involved.
Basically I can take a L bumper and put the S/Q spoilers on it but there are minor tweaks it needs to fit properly. I have done it. The rear is the hardest as there is a spacer on each side for the spoiler to fit right. Holes through out to tighten down.
Hope that helps?
Jason
 
1 - 4 of 4 Posts
Top