[NewAlfaOwner]

All,
Any info or recomendations on replacing the steering tie rods and the connection sleeve? I just got some new tires and was going to get an alignment, but these parts are worn out and need replacing. I would appreciate any and all advice. Thanks in advance for all your help.

 

[NewAlfaOwner]

I would allow someone else to do it if they didnt want to charge me a fortune. I would like to do as much as possible myself for knowledge, understanding, experience, and personal satisfaction. I will find an alignment shop that will align it by Alfa specs. Ive done everything myself so far, so I think I'll continue down that road until I get to something I cant do.

 

[NewAlfaOwner]

All,
A great deal of information came out in this forum, but more of what Im looking for is how to physically remove the parts and replace them, ie:
1. jack up front of car and support at XXX since you will be working on the suspension portions, you will want to support the weight of the car on at XXX.
2. loosen and remove YYY.
3. loosen and remove ZZZ.
4. loosen and remove AAA, the tie rod bar, but before you remove it make sure to do the following so that when you put it back together, you can drive it to the alignment shop.

This is a job ive never done and dont want to muck things up. Any and all info is appreciated...