[Eric Birocco]

I have replaced the electric motor on my 84 Veloce and in the process the window cable came unwound from the grooved pulley on the regulator. I have referanced the shop manuel and have not been able to find any information on the cable setting or the proper installation and can't get the window to work properly.Has anyone experienced this problem?
Eric Birocco

 

[GraniteAlfa]

Just did a quick search in the Spider section and came up with these.
You can try a different search if you don't find what you need or someone can help you with specific questions.


http://www.alfabb.com/bb/forums/search.php?searchid=846015

 

[VELOCEMAG]

Look at the other door. If I'm not mistaken the factory manual is not 100% correct.

 

[Zunige]

Welcome to the BB, Eric!

Note what Dana mentioned in his post: you've posted your question in the general forum, which isn't really where this type of info is typically found. The Spider technical forum is where you will find information, and also where you should post your questions... There's a wealth of info on the BB!

Best regards,