Alfa Romeo Forums banner

1 - 8 of 8 Posts

·
Premium Member
Joined
·
611 Posts
Discussion Starter #1
Perfect front clip.

Car still has a good, low miles 2ltr (30K) but floor and rocker rust make restoration impractical.

Other parts negotiable.

The nose was a factory manufactured replacement installed after an accident. Protected through the years by a thick coat of Emron.

cheers<
Brian
 

Attachments

·
Premium Member
Joined
·
611 Posts
Discussion Starter #3
bumpers, etc

That's a good question.

I have three sets of bumpers. I need to pull them all, clean them up and figure out which I want to keep and which I can recondition and sell.

If you can be patient I'll hold on to your request.

I'm going to be keeping the grill as a backup. I have two, both of which are fairly pitted, but from experience I find that they take a lot of abuse...

Anyone out there have any interest in sheet metal? :confused:

B
 

·
Registered
Joined
·
100 Posts
I would be interested in buying a set of bumpers as well if your your going to sell 2 of the three. lf your going to part out the entire car I would interested in additional parts.

Thanks, Rick
 

·
Premium Member
Joined
·
611 Posts
Discussion Starter #6
interior bits

Not too much left in the way of interior. I have a spare rear-drape set with split seams, a handful of guages, gauge shrouds, some rusty seat pans, etc.

Of the two parts cars I have, one had already been stripped and the other (the one with the nice front clip) I stripped and used as a donor for my resto. Both cars are just empty shells - one with and one without a motor.

I'll only have one spare bumper set when all is said and done. I'll post photos when I've pulled them.

Brian
 

·
Premium Member
Joined
·
611 Posts
Discussion Starter #7
bump

Someone come get this car. Good motor, nice doors, nice nose. Definitely worth saving :)

I wish I could - just don't have the space.

B
 

·
Registered
Joined
·
19 Posts
If there are any more available, I'd also be interested in Bumpers....

Cheers,

Alex

That's a good question.

I have three sets of bumpers. I need to pull them all, clean them up and figure out which I want to keep and which I can recondition and sell.

If you can be patient I'll hold on to your request.

I'm going to be keeping the grill as a backup. I have two, both of which are fairly pitted, but from experience I find that they take a lot of abuse...

Anyone out there have any interest in sheet metal? :confused:

B
 
1 - 8 of 8 Posts
Top