Alfa Romeo Forums banner

1 - 5 of 5 Posts

·
Premium Member
Joined
·
4,545 Posts
Discussion Starter #1 (Edited)
SOLD



I have a total of 121 shims for the 2000/2600 engines. Might also fit the 1900 but not positive. There are 72 new 9.5mm shims, 37 used 9.5mm shims and 12 used 10mm shims. There are a lot of the thicker sizes in new ones. I have measured each one for thickness and diameter. I have listed all the sizes below. I there is more of one size I have listed the quantity next to that size. Measurement is SAE then MM last. All shims are sorted and marked with size in SAE and they are marked either new or used for the 9.5mm and the 10mm are marked with a 10. The shims are in a new shim box with shim sizes written on the pockets. These are hard to come by shims. As far as I know no one is making new ones. I'm asking $300.00 for all plus shipping or make an offer. They will fit in a usps medium flat rate box for 12.65 or I can ship ups at my cost. I will also ship international.

New 9.5mm
sae mm
51 / 1300
58 / 1475 have 4
59 / 1500 have 2
60 / 1525 have 3
65 / 1650 have 3
66 / 1675
67 / 1700
68 / 1725
69 / 1750 have 4
70 / 1775
71 / 1800
72 / 1825 have 2
75 / 1900
76 / 1925
77 / 1950
78 / 1975
80 / 2025
84 / 2125
86 / 2175 have 3
87 / 2200
88 / 2225
89 / 2250
90 / 2275
91 / 2300 have 3
92 / 2325 have 5
94 / 2350
95 / 2400 have 3
96 / 2425 have 2
98 / 2475
99 / 2500 have 3
101 / 2550
102 / 2575 have 2
104 / 2625 have 2
105 / 2650
106 / 2675
107 / 2700
108 / 2725
110 / 2775
112 / 2825
114 / 2875
115 / 2900 have 3
116 / 2925 have 2

Used 9.5mm
sae mm
51/ 1300 have 2
56 / 1425
62 / 1575
63 / 1600
65 / 1650
67 / 1700 have 3
68 / 1725
69 / 1750 have 2
70 / 1775 have 2
71 / 1800
72 / 1825 have 2
73 / 1850 have 2
74 / 1875 have 2
76 / 1925 have 3
78 / 1975 have 3
80 / 2025 have 2
82 / 2075
84 / 2125
85 / 2150
87 / 2200
107 / 2700

Used 10mm shims
sae mm
50 / 1275
54 / 1375
70 / 1775
71 / 1800 have 2
73 / 1850 have 2
74 / 1875 have 2
75 / 1900
78 / 1975
93 / 2350
 

Attachments

·
Registered
Joined
·
21 Posts
2600 Valve shims

Jim - If you still have any of the 9.5 mm shims - I'd be interested in a half dozen or so. Let me know- Thanks, Brian
 

·
Premium Member
Joined
·
4,545 Posts
Discussion Starter #3
Jim - If you still have any of the 9.5 mm shims - I'd be interested in a half dozen or so. Let me know- Thanks, Brian
The whole set is for sale.

Thanks
 

·
Registered
Joined
·
8 Posts
2600 SHIMS

Hi Jim:
I'm building two 2600 motors so these shim sets will come in handy. If you send me an invoice and an address to my email, I'll overnite you a check.
Thanks.
TED JOHNSON
[email protected]
 

·
Push hard and live
Joined
·
9,652 Posts
Ted,

If you decide the 10mm shims don't fit your 2600, I'll take them.
 
1 - 5 of 5 Posts
Top