Alfa Romeo Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
224 Posts
Flywheel Lock

I can't seem to find the photo, but I have successfully used a crowfoot open end wrench as a flywheel holder. Find the right size that fits between three or four teeth, and use a bolt through the socket end to bolt to a bellhousing hole. Of course you can borrow an impact wrench to get the bolts off, but you'll still need a holder to put them back on with a torque wrench. Good luck. -Steve
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top