[gdaquilina]

PM sent- please consider me for the following parts to complete my 1986 Graduate:

Power mirror joystick switch
Engine compartment light
Passenger interior courtesy light fixture complete
Driver side horn
Parcel area (behind seats) bottom panel with black carpet no speaker holes
Dash lights adjustable switch
Steering wheel hub
Top hold down elastic straps
L-Jetronic control modules- both (ignition and fuel)

 

[Mborras1]

Il take the below
Ash tray
Driver side corner light harness with bulb if still good
Rear tray with wires for plate light and bulb harness and bulb for trunk stop light
Brake light switch
Clutch pipe from clutch MC to connection of rubber hose if still good.

 

[Mborras1]

Il take the below
Ash tray
Driver side corner light harness with bulb if still good
Rear tray with wires for plate light and bulb harness and bulb for trunk stop light
Brake light switch
Clutch pipe from clutch MC to connection of rubber hose if still good.

And the tachthamy relay

 

[triz]

The turn signal, wiper washer, stalk.

 

[joelynbeach]

Interested in the passenger side mirror if they are powered mirrors. Let me know if available and price.
Thanks.

 

[Swampdweller]

I'm interested in the armrests and the upper piece of the interior of the door (the part heldon by two screws with the chrome strip on the bottom) if they're intact.

 

[Delllta]

I’ve put the car on stands and setting things up so I can dismantle parts. For all of you have contacted me be patient. I have been inundated with requests for bits & pieces.

To summarize the car:

I don’t know the condition of the electronics

The car is complete however, it’s been exposed to Florida sun and many/most of the interior bits aren’t in the best shape. The chassis has rust but the doors, hood, & trunk are good

Some additional photos:

 

[gdaquilina]

Pease add to my list:

Heater blower switch

Thanks!

Jerry

 

[gdaquilina]

The photos are a great help! Thanks for posting.

I see that the lighter is still present- I would like the complete unit if available.
It would be great to have a spare Variable Valve Timing (VVT) unit if you are going to strip the engine of parts.
It didn't look like there were many of the original hose clamps but I would like what is there if possible.
The Mass Air Flow Sensor is probably corroded inside but it would be great to have one to try to upgrade and rebuild.
The windshield washer bottles are available reproduction but if the one in the car is not cracked I would hate to see it go to waste so would like it.

Thanks so much for offering parts from this car. I know it can be a pain to remove them but you are doing a great service to those who need parts but have been unsuccessful finding them.

Jerry

 

[billj]

I'd like the passenger wing mirror if it isn't already taken.

 

[Jim G]

If the carpet is brown. I need the trunk floor carpet.

 

[Delllta]

Carpet is black

 

[spiderNord]

Interested in 1) all rear three-piece spoilers 2) rear view mirror 3) driver & passenger seats.

just joined so don’t really know how this works… Please let me know and advise. Thanks.

 

[Delllta]

Got some disassembly done. I’ll start replying to requests in the order I received them.

 

[gdaquilina]

Wow! You're doing really well! Best way to learn about a car is to take it apart!!

 

[Mborras1]

Wow! You're doing really well! Best way to learn about a car is to take it apart!!

Shoot he's gonna make some MONEY$$$

 

[Mborras1]

And the tachthamy relay and the ignition barrel with key if you are able to remove.

 

[musiccity]

Interested in driver's side mirror glass if these are power side mirrors

 

[gdaquilina]

Shoot he's gonna make some MONEY$$$

He deserves to get a decent return for the work and effort to remove the parts, package, and mail them. The real winners are those who will receive parts that they need.