Alfa Romeo Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
119 Posts
Discussion Starter #1
Anybody knows where I can buy rebuilding kit for my gear box, at least new bearings..
Would appreciate all replies Thanks Sergio
 

·
Premium Member
Joined
·
2,605 Posts
Highwood in England. Chris
OKP in Germany another I use.
Mark in CN has gear boxes as well.
stefmiesterb
Mine as well covert to the later setup 78+
Parts are easier to obtain.
He sold me a setup to convert me Race car, but never installed it cause my 75 setup has been upgraded, and
only a few years old.
 

·
Registered
Joined
·
119 Posts
Discussion Starter #3
Thanks for the tip. My 75/Alfeta has been set up by a very knowledgeable race car mechanic. Is a pure Italian sports car, modified for racing. But I never raced it...just having fun on the road living most of same class cars back in the dust. The basic 2.0 liter engine puts out over 250/bhp at the wheels and with its lighter load (did away with the heavy made for US bumpers replaced with European light chrome ) Stiffened suspension, light Ruspa rims made in Italy (not china)the engine with its race cams and twin Webbers screams at over 8000 rpm.
The Forum got me mixed up with another Sergio from San Francisco I will post a picture of my car for proper ID.
On the way back from a friendly Alfa rally the gearbox started whining over 70/mph and got louder as speed increased and I'm wondering if you know of anyone in the states that can get new bearings.
 

·
Registered
Joined
·
670 Posts
Serge
It could be that the nut that holds the gear stack together has loosened up.
That makes more sense than a bearing to me.
RML
 
1 - 4 of 4 Posts
Top