[gt.junior]

hi, can anyone tell the exact location of the toolkit in the trunk for my series 2 1750 GTV (1970).it has two rubber-straps for fixing. a picture would be best,but description also very welcome.

thanks in advance, gt.junior

 

[unicornbc]

If the straps are under the driver side trunk lip I am guessing that those straps are for the plastic tank used for the US Evaporative emission control. The Tool Kit was just a small black plastic sleeve with a wheel wrench, a couple of wrenches and a spark plug wrench.

 

[GTV4EVR]

And on the series 1 Euro version at least just sat on the spare under the floor.

If the straps are under the driver side trunk lip I am guessing that those straps are for the plastic tank used for the US Evaporative emission control. The Tool Kit was just a small black plastic sleeve with a wheel wrench, a couple of wrenches and a spark plug wrench.

 

[RossoGTV4Me]

For a 72-74" 2L GTV, was it also placed in the spare wheel well? I am not sure that was teh stock factory placement location?

 

[GTV4EVR]

I don't know. It's just a plastic tool roll so I can't imagine it being attached anywhere

 

[RossoGTV4Me]

Right, I have seen some put in the rubber strap that surrounds the black plastic vapor container on the left side of the trunk.

 

[gt.junior]

THANKS to all of you for giving me advice! My car is a 1970 1750 GTV European specification, as it has been delivered from new to Austria,where I live. The straps and the toolkit I bought recently from ebay, so the straps are loose and not fixed to the car. From your answers till now, I suppose the toolkit will be mounted in the spare wheel well.I f anybody still has any advice, I d be glad to hear from.
Thanks again and very kind regards from Austria, gt.junior

 

[Solmanic]

Can somebody post a photo of an original tool-kit for a 1970 - 1750GTV? I currently just have the wheel brace and jack wrapped up in some rags and clipped into the boot (trunk for the Yanks). Is there more to the "kit" than that?

 

[papajam]

There's a pic of a Series 1 1750 GTV toolkit in this post. I'd think that the Series 2 would be the same but I'll need to check the parts book.

 

[Solmanic]

Excellent - thanks Papajam. I can see some tools in there which have been floating around my general toolbox for years and now I know where they came from! I must re-unite the family.

 

[gt.junior]

Can somebody post a photo of an original tool-kit for a 1970 - 1750GTV? I currently just have the wheel brace and jack wrapped up in some rags and clipped into the boot (trunk for the Yanks). Is there more to the "kit" than that?

hi, i try to insert a picture of my recently (on ebay) bought toolkit. i know its not complete but brandnew.
regards form austria, gt.junior
ps: by the way,can you tell me on which location of the boot its clipped on?

 

[ARMexico]

I am taking advantage of this old post. Any idea where in the trunk is located/fixed the toolbag for the '74 2000 GTV Euro version. A picture would be appreciated. Thanks.

 

[bellagt]

@ARMexico The tool kit was typically loose in the trunk or placed spare tire wheel well. They were never “fixed” to a location.