[rusty racer]

Hi,
What are the steps to installing door glass in my 1969 GTV? It has the mechanical (non cable) window mechanism.

Does the front quarter glass housing go in first or after the door glass? Does the aluminum channel that the door glas sits in go on the mechanism first or install with the glass?

Thanks,
Jonathan

 

[ShadeTree]

The channel on the bottom of the glass must be glued to the glass first (make sure the channel is on the correct side). Wind the regulator to its lowest point, lower the glass into the door and slip the channel over the regulator. Move the glass as far back as possible, then install the vent window assembly.