driver's side hinge with the reclining adjustment knob (the whole mechanism, not just he cover.)
Mine seems to be internally broken, it falls back with a bit of pressure . The picture below is the passenger's side, need it's mirror image.
I just finished a seat cover replacement on my 1974 Berlina, and I have most of two spare front seats left over.
I'd prefer not to ship the big parts, but if someone really needs them I have them.
If anybody needs any spare parts I have:
2 headrest adjusment rods - 1 needs to be...
I took out the seats and now I am slightly unsure about reinstalling. There are two pieces I am not sure what they are for or how to correctly install them. It is the two brackets with holes. Attaching photos one of which from when I removed the seats but doesn’t really help show these in...
Good evening everyone,
A couple days ago my passenger seat belt receiver gave up the ghost. One click and the plastic fell apart.
I see classic Alfa has some available but they are a completely different style from whats on my car.
Does anyone have a period correct 1974 spider passenger sear...
I bought these from OKP in Germany and paid $500 US. They were to be used in a project that never happened. There is a smudge of black paint on one foam. No idea how it got there, but it should not affect the function. Selling for $300/obo plus shipping cost from 33957 (Sanibel FL USA)
Posted in Sedan forum as well. -hoping for more traction here:
I’m still on the hunt for the ”shared” middle front seat track/rail that mounts to the transmission tunnel for the inside tracks for both front seats to slide.
Other than the lower trim piece, “spat” for the driver’s seat, its the...
Series 4 seats for sale.
Fully clad in black leather with black perforated leather for the inserts.
These are not some janky seat covers.
The leather was custom cut, stitched and
Both seat bottom foams were also replaced.
1.5K USD for the set.
These are very hard to come by now.
If you're cheap...
Took out my driver's seat today to remove the central consol, replace handbrake cable and maybe carpet too. Slight issue, after undoing, one of the seat fixing captive nuts vanished. The sheet steel around it had broken off.
Have now retrieved it, using telescopic magnet thingies, and got a...
72-74 GTV: Windshield, Radiator, Driver Side Seat, Wiring Harness, Console Wiring,
I'm looking to get a 1972-74 GTV:
- Complete Wiring Harness, including the wiring connectors on the fuse box
- Console Wiring
- Driver side door latch arm assembly
- Good condition used front windshield
I'm looking for these parts for a 72-74 GTV: 1 Front Seat with track, 1 Interior Console (no AC), and 1 lightly tinted green door glass.
If you're in the market to sell please give me a call at 805-241-0250.
One of the rear seat belts in a 194 164 Super has developed an issue retracting itself. The yank/lock operation remains fine but the recoil spring system seems weak or somehow sort of jammed. Yank on the belt and it will lock but put it on and it will have a lot of slack the spring system is...
Thanks to all who expressed an interest in these. I am currently negotiating with a local buyer. Any of the Berlina parts that remain will be posted on this forum in new ads.
Tan back seat out of a 1969 Berlina. This has been stored in my basement since I disassembled the car 1980 and is in...
I am in desperate need for the screws that attach the seat hinges. They are Chrome pot melt screws and attach the hinges to the seat bottom and seat back. One side has the large adjuster know the other side has screws. Any one have a Duetto Seat or part please let me know.
I've been working with a very tight budget on my 1981 GTV6 for the past year. When I got it, it was a well maintained car that had been parked in a garage for nearly 14 years due to a burnt out clutch. I have done all the work myself and am proud to say it is in it's final...
while helping dismantle a twinspark I was amazed at how heavy the front seats are. A lot of this must be in the electric motors but for cars with one driver the seat postions almost never need to change so is there any way of the seats being positioned and then motors removed to save...