Alfa Romeo Forums banner

pedal

  1. Brake Bleeding

    Spider - 105 & 115 Series (1966-1994)
    Today I bleed my brakes for the first time. The old fluid was a dark brown and I would loose braking power after a few hard stops. The pedal before the bleed was always a little low and it seemed that I should have a bit more braking power. There was about a 1.5" dead zone that did nothing...
  2. booster vs. master problem

    Suspension, Steering, Brakes, Wheels & Tires
    Hi All; I have a problem I would appreciate some help with. I recently lost the brakes on my 66 gt while driving. when tracking the problem, I noticed that the line from the reservoir to the master had a kink in it. I rectified the problem and for good measure took the master apart and...
  3. Hard Pedal – Master Cylinder size?

    Suspension, Steering, Brakes, Wheels & Tires
    I am finished with my race car (105) and found that I have extremely hard pedals. The setup is as follows: - Tilton floor pedals - Dual master cylinders for front and rear - Rear with proportioning valve - BMW 2002 Tii 4pod front callipers - Bias adjuster I read that guys would bore the master...
  4. 1988 Milano Brake Lights Dont Work!

    Milano/75 (1985-1993)
    Hellooooo everyone, Ive been working on a 1988 Milano for a friend. Brake lights dont work. But, all the other tailights work properly. So far I have: 1.) Checked the corresponding fuse 2.) Inspected the bulbs and connections/grounds on the tailight sockets 3.) Located the Brake light switch...
Top