Alfa Romeo Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-6 of 6 Results
  1. Spider - 105 & 115 Series (1966-1994)
    For whoever may find it handy, here's how I installed my luggage rack: - Took about an hour. Using tape and a pen, i marked the holes (2.25” from bottom of boot, 3.25” from left & right of boot). I then used a 7mm drill bit to drill the 4 holes. - Next, I put a neoprene washer under each 4...
  2. Spider - 105 & 115 Series (1966-1994)
    Hi, I decided to install an alfaholics radiator today on my 1979 spider, since my OEM one has been leaking due to acidic old coolant from the PO, which was left for a long time and burned small holes in the rad. Anyways, while installing, I came into some trouble. 1) The radiator would not fit...
  3. Elvezio Esposito Classic Car Interiors
    This video is for all Alfisti that speak Italian and want to install the seat covers and the foams of Giulietta Spider on their own. Enjoy! :wink2: Check the blog
  4. Milano/75 (1985-1993)
    So I started to replace the passenger side ball joints yesterday on my Verde. Got the old lower ball joint out and started to put the new one in, but cannot seem to figure out how to get the splined part seated in the A-Arm. I'm sure someone has a suggestion as to how to do it (probably...
  5. Spider - 105 & 115 Series (1966-1994)
    My 1986 Spider came with a Front-end mask from IAP. Most of the installation is pretty obvious, except for the placement of the four metal 'S' hooks. I called IAP, but they don't have instructions for it and none in stock. Does anyone have a .pdf of the installation guide or know where those...
  6. Spider - 105 & 115 Series (1966-1994)
    I'm installing Koni Reds on my 87 Quad (front end first) and am having A TIME pushing the bottom of the shock with the slide-on bushing back on the post (shaft). I know they were kinda tough to remove, but I simply cannot get the new ones to slide back on. I cleaned off the post, even put a...
1-6 of 6 Results