Alfa Romeo Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 25 Results
  1. GT (1963-1977)
    Hi everyone Could my vibration/shudder on acceleration be due to slightly bent input shaft ? A few months ago I wrecked the standard clutch on my 2 litre coupe on a track day in Brands Hatch. Two of the three metal strips that connect the pressure plate to the diaphragm broke. It was quite a...
  2. Gearbox, Transaxle, Differential & Propshaft
    Hello, I can see on the forums that you have good knowledge about alfa romeo, and would really appreciate if you could advise me on this issue. I have a 2009 159 gts 2.2 and it's been giving me check your gearbox message. Everytime I drive the car for a while stop it to go sowhere and when I...
  3. Gearbox, Transaxle, Differential & Propshaft
    Hi, I’m rebuilding my gearbox. I changed all sychro rings ans sleeves, the bronze bearing inside gear assembly, and dog rings. everything has been changed, and gaps are within tolerances. BUT, if all gears are locking easily when static, they hardly lock or not lock at all if I try to engage...
  4. Gearbox, Transaxle, Differential & Propshaft
    I have two bellhousings (and two gearboxes) that came with some cars. I need to figure out which one to use for my '59 Sprint 101. I have two sets of photos. The first is below. The second will be in the next post. If anyone can help me to figure out which one will work with the Sprint I'll heap...
  5. Alfa Romeo Parts For Sale & Wanted
    Hi all, Couple of weeks a go a member of the Forum was selling a set of complete and lightened gears, as well as the gear crankshaft, for a 1750/2000 GT Veloce Bertone for track-day purposes. Unfortunately (for me of course), the member has already sold the set. I was wondering wether some of...
  6. Alfa Romeo Parts For Sale & Wanted
    Hello Looking for gearbox shifter mechanism for 67 Super. Push down for reverse type. The shaft where the spring loaded detents on mine are ovaled out and the spring loaded detent binds up. See pic below for what I need. Shipping to California please. thanks Daron
  7. Engine Conversions
    Hey people, I'm trying to find the bolt pattern of the Busso 3.2 V6 for a project of mine since I don't have the necessary tools to do so. I've found some drawings which are given below in case they're helpful to someone but so far nothing with the required dimensions given. The first three...
  8. New Zealand Forum
    Hello, Looking for someone to rebuild a 105 series gearbox with worn syncros in Auckland, I have the gearbox out of the vehicle and the parts to replace (Alfaholics parts). The Italian Auto Centre and Continental Cars don't appear interested in taking to task on any suggestions...? Cheers...
  9. Gearbox, Transaxle, Differential & Propshaft
    Hey Folks, Finally got my engine running on my 86 Spider! After some around the block confidence drives, ive noticed some strange grinding. I thought that it may be my front passenger wheel bearing (checked working), but fear it may be something worse. I hear a grind / rattle when turning sharp...
  10. 164 & 168 (1991-1995)
    Hi, Have a spare gearbox for a 1995 164 3.0 24v, with an inch hole in the diff casing where the diff blew. Understand the gearbox itself was great before the diff let go, so wondering if a Q2 limited slip diff could be purchased to replace it and the casing repaired. Have heard some Q2 gear...
  11. 164 & 168 (1991-1995)
    Hi, Does anyone know if the gearbox casing on a series 2 164 twinspark is the same as the series 2 164 24v? Thanks.
  12. Gearbox, Transaxle, Differential & Propshaft
    I need the opinion of some of the gearbox gurus here at Alfabb.com :confused1: I have opened the gearbox of my 105 Series 1969 1750 GTV to check the condition, and to me it looks good. But I'm very far from being an expert! This is the first time I have opened a gearbox... I have not dismantled...
  13. Production Alfas (1992-2016) - [CA/USA Excluded]
    I've had a problem with 2nd gear slipping to 4th gear then slipping into neutral. It has been an ongoing problem that my mechanics have yet to fix. I'm hoping to find some help online so when I take it back to the mechanics I can give them a list of possible causes that they haven't investigated...
  14. Gearbox, Transaxle, Differential & Propshaft
    I have had an ongoing problem with my 159 JTS that no mechanic has yet been able to fix. I am petrified each time I drive the car in case I have an accident with my kids in the car. As I have been driving, I have been experiencing the following: once in 2nd gear, it skips 3rd gear, goes straight...
  15. Spider - 105 & 115 Series (1966-1994)
    I read this post http://www.alfabb.com/bb/forums/spider-1966-up/264873-leaking-fluid-under-engine-87-spider.html and recognized it as the exact leak that I had under my car. Fearful of my ability to reassemble, I dove into the repair. Yeah, I am the guy who punctured my new oil filter and...
  16. Gearbox, Transaxle, Differential & Propshaft
    I am the proud owner of a '88 Spider and almost finished with my ground up restoration. I didn't feel the need to rebuild the transmission, but I did buy and give new oil seals for the transmission to the mechanic that was putting in some of the shall we say "heavy lifting" since I do not have...
  17. Boxer Engined Alfa Romeos
    Hey guys, I have spent the past 2 weeks doing an extensive rebuild on a 16v boxer engine, that will go into my Series 1 33 which currently has the 1.5L motor with a single carby :D. Seeing as how much I appreciated threads such as this when I was researching, I thought I should post my...
  18. Alfa Romeo Parts For Sale & Wanted
    Hello to everyone, I have a near new 6 speed transmission, came from a 2002 GTV with 17000 Km on it. It is located in Melbourne, Australia but am willing to ship anywhere. For more info i have attached the current ebay ltem number: 330869285754 ( just put the number into the search bar)...
  19. Romeo F12 & A12
    Hello, i am searching a Gearbox for the Romeo 2. It was produced by ZF with the Code: 4 DS - 7 please mail me, if you can help. Nick
  20. Alfa Romeo Parts For Sale & Wanted
    I have a 1986 Alfa Romeo Spider that I am parting out. The car has been sitting for a few years, but before I started parting it out I made sure it runs. After replacing some vacuum hoses and cleaning some sensors it started right up, like an Alfa should. Please contact me with all your parts...
1-20 of 25 Results
Top