Alfa Romeo Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-8 of 8 Results
  1. Milano/75 (1985-1993)
    Hey everyone, I have an 87 milano gold that im restoring. All the bushings and general front and rear suspension are old and id like to replace them with poly. Wheel bearings also need changing. Because i'm on a budget, I'm wondering what stuff you all would recommend doing myself and which you...
  2. GT (1963-1977)
    I have a 1966 Giulia Sprint GT Veloce. The welds failed where the top of the front springs connect to the chassis. No rust. Pictures show failure and repair with new plate welded in.
  3. Spider - 105 & 115 Series (1966-1994)
    Hi All, I have a reluctant top arm bolt (the cross-thru fixing in the engine compartment) on my '75 Spider Veloce which refuses to slide out despite the nut coming off easily, the bolt rotates independently of the arm, and the arm freely moves. On the other side of the car it slid out first...
  4. Suspension, Steering, Brakes, Wheels & Tires
    While cleaning and preparing to rebuild the front suspension on my 69 GTV, I found this tear in the sheet metal of the drivers side front shock mount structure. Can the group offer any advice on the best way to repair this situation? Is it acceptable to MIG weld a bead over the tear? Or is it...
  5. GT (1963-1977)
    Unfortunately, one of the threads on the 'dog bone' that the lower A arms attach to is stripped. I didn't notice on disassembly, but the fine M16 x 1.0 thread is stripped on one side of the spigot, not visible until I took the casting off the car. Is it possible for a machine shop to repair...
  6. GT (1963-1977)
    Hi everybody, I need some help, I have just changed my trackrod ends on my giulia GT Veloce and the left trackrod on the tie rod hits the lower control arm. What could be the problem here? The old trackrod was also very close to the control arm. Is there any way to adjust the position of...
  7. Suspension, Steering, Brakes, Wheels & Tires
    Hello all, I'm guessing that I need to have my front end re-done. My steering wheel has at least 2 inches of play in either direction as I'm driving down the road. Is there a "How To" manual or video out there that can help me do this job at home? I read on some of the other posting that I...
  8. Suspension, Steering, Brakes, Wheels & Tires
    Thought I'd post a couple of pictures of the spring pans I removed yesterday. They sat on the car untouched by humans for 37 years. If you know you have alu bottom spacers on your front springs, well ... get some nylon ones ;) The spring pan was more or less a solid piece of rust and corrosion...
1-8 of 8 Results
Top