Alfa Romeo Forums banner
failure
1-5 of 5 Results
  1. 164 & 168 (1991-1995)
    Hi, Have a 1995 164 3.0 24v manual and am hoping this is a needless query but this happened today: Started the car, oil pressure light stayed on but oil pressure needle rose OK. After few seconds the light went out and assumed faulty sender (once came on at 70mph 10 years ago - again gauge...
  2. 164 & 168 (1991-1995)
    Hi, has anyone ever suffered a failure of the ABS pump unit in a 164? On a similar topic, what about the ABS sensors at each wheel?
  3. 164 & 168 (1991-1995)
    Hi, Has anyone ever suffered an ECU failure for a 164? If so can I ask what the circumstances were and what model 164 it was? Just curious, seeing as I've been trying to use the OBD port.
  4. Spider - 105 & 115 Series (1966-1994)
    I understand the need to check the date of manufacture of tires on our cars. Now I find myself thinking about my wheels. I am assuming here that my 79 spiders has the original wheels. So my question do wheels fail. I look at them closely and do not see cracks, or any sign of stress fractures...
  5. 164 & 168 (1991-1995)
    I was at VIR and seemed to lose power going up the hill on North Course. I may have heard some noise, but I am not sure since there were other cars nearby. I was able to limp down pit lane, but the car stalled pulling into the paddock. I had it towed home. I did turn it over a few times in...
1-5 of 5 Results
Top